Description
A clear worktop in the kitchen with the built-in BLANCO TORRE PVD washing-up liquid dispenser
The built-in BLANCO TORRE PVD washing-up liquid dispenser helps keep the area around the kitchen sink tidy by moving loose bottles of washing-up liquid and soap off the worktop and out of sight. The stainless steel PVD finish blends aesthetically with modern sinks and mixer taps and creates a unified look throughout the kitchen. The BLANCO Open series solution is a practical choice both when planning a new kitchen and when updating an existing sink.
Main features
- The built-in solution is installed into the sink or worktop, which helps keep the worktop free of loose bottles and makes the kitchen easier to clean.
- The durable PVD stainless steel finish suits modern sinks and mixer taps in stainless steel or metal tones well and supports a consistent design line.
- Easy filling from above lets you add washing-up liquid or liquid soap directly under the dispenser pump, without having to remove a bottle from under the sink.
- Practical everyday use dispenses the required amount of liquid straight into the sink bowl, which reduces waste and keeps the area around the sink cleaner.
- Suitability for different sinks and worktops allows the dispenser to be used with BLANCO sinks and mixer taps as well as with the products of many other manufacturers, provided a suitable hole exists or can be made.
- The discreet low profile leaves only the top of the pump visible, which does not draw too much attention but is still conveniently at hand.
Compatibility and uses
The BLANCO TORRE PVD washing-up liquid dispenser is designed to be installed in a kitchen sink or worktop, in an existing tap hole or in a separately drilled hole. In general it suits most standard sinks and worktops where a hole of suitable diameter can be made. The dispenser works especially well with BLANCO’s range of stainless steel and PVD-finish mixer taps and sinks, but it can also be used with products from other manufacturers.
If the sink already has an unused hole, for example for an additional tap or a button, it can often be used to install the dispenser. If in doubt, it is worth double-checking the size of the hole or consulting an installation specialist to make sure it suits the specific sink model and worktop material.
The dispenser is suitable for both washing-up liquid and liquid soap, which means it can be used for everyday washing-up in the kitchen as well as, for example, at a utility sink for handwashing.
Care and cleaning
PVD-coated stainless steel stays beautiful when cleaned with a soft cloth and a gentle detergent. It is advisable to avoid abrasive cleaning products and steel brushes so as not to damage the surface. Regular gentle cleaning helps preserve the finish of the dispenser and reduces water marks and dirt building up.
To keep the pump working smoothly, warm water can occasionally be run through the dispenser, which helps remove residues of soap or washing-up liquid. If very concentrated products are used in the kitchen, it is worth diluting them slightly with water when needed to reduce the risk of blockages.
Installation and use
The dispenser is generally installed in a hole drilled in the edge of the sink or in the worktop. For installation, the top of the pump is inserted into the hole from above and secured from below with a counter ring or fixing screw, then the container is screwed on underneath, remaining hidden under the sink or worktop. To ensure a safe and tight connection, professional installation is recommended, especially if the hole has to be drilled into the worktop.
Use is simple. To fill the container, lift the top of the pump and pour the washing-up liquid or liquid soap directly into the opening. In everyday use it is enough to press the pump to dispense a suitable amount of liquid straight into the sink bowl or onto the dishes. This way the detergent is always at hand, yet out of sight.
Included in the set
- The BLANCO TORRE PVD dispenser pump top, which remains visible on the sink or worktop
- A container for liquid soap or washing-up liquid, which sits under the sink or worktop
- Fixing parts for securing the dispenser safely
When to choose the BLANCO TORRE PVD washing-up liquid dispenser
The BLANCO TORRE PVD washing-up liquid dispenser is a suitable choice if you want to reduce visual clutter on the kitchen worktop and prefer a hidden but conveniently usable solution. The stainless steel PVD finish suits modern kitchen design and creates a unified look next to similar metal-toned mixer taps and sinks from BLANCO or other manufacturers.
This dispenser is especially practical when planning a new kitchen, but it is also well suited to upgrading an existing sink, if the sink or worktop has a free hole or one can be drilled. If you value a tidy worktop and a functional solution, the BLANCO TORRE PVD offers a simple way to make everyday washing-up more convenient and organised.




Reviews
There are no reviews yet.