Description
Soap dispenser BLANCO TORRE in satin gold
The BLANCO TORRE soap dispenser has a cylindrical brass body with a PVD finish in satin gold. According to BLANCO, the metallic surface matches many BLANCO kitchen taps and sinks, so the satin gold TORRE suits a tap in the same finish. The body is 47.5 mm in diameter and the dispenser weighs 530 g.
Installation in the worktop or sink
The dispenser fits a hole of 26–40 mm in diameter and a worktop up to 45 mm thick. Before fitting, lift the pump out of the body and push the suction tube fully onto the pump. The body goes into the hole with its seal and is fixed from below with a seal and nut tightened with pliers. The bottle is then screwed onto the body. The bottle is 59 mm in diameter and reaches 214 mm below the worktop.
Filling and use
To refill, pour a mix of washing-up liquid and water at 1:1 into the bottle through the body opening. Pour slowly so that the mix stays in the bottle. Then push the pump back into the body: press the pump head down and the liquid comes out of the spout.
Cleaning
Clean the dispenser with the soft side of a damp sponge and a chlorine-free cleaner. Dry the surface with a soft cloth afterwards.
In the box
- Soap dispenser BLANCO TORRE, 1 pc
- Mounting hardware



Reviews
There are no reviews yet.