Description
Soap dispenser BLANCO LATO in satin gold
The BLANCO LATO soap dispenser has a brass body with a PVD finish in satin gold. BLANCO designs its metallic dispensers to match BLANCO kitchen taps and sinks, so the satin gold LATO suits a tap in the same finish. The pump head is 45 mm in diameter and the dispenser weighs 310 g.
Installation in the worktop or sink
The dispenser fits a hole of 27–35 mm in diameter and a worktop up to 45 mm thick. The body goes into the hole with its seal and is fixed from below with a seal, washer and nut tightened with pliers. The bottle is then screwed on by hand and the pump pushed into the body from above. The bottle is 59 mm in diameter and reaches 221 mm below the worktop.
Filling and use
To refill, lift the pump out of the body and pour in a mix of washing-up liquid and water at 1:1. Pour slowly so that the mix stays in the bottle. Press the pump head down and the liquid comes out of the spout.
Cleaning
Clean the dispenser with the soft side of a damp sponge and a chlorine-free cleaner. Dry the surface with a soft cloth afterwards.
In the box
- Soap dispenser BLANCO LATO, 1 pc
- Mounting hardware




Reviews
There are no reviews yet.