Description
Enclosed 3D printer for a wide range of filaments
The FDM ELEGOO Centauri Carbon 2 3D printer prints with 1.75 mm filament and has a build volume of 256 × 256 × 256 mm. The enclosed chamber and a nozzle that heats up to 350 °C let you print more demanding filaments as well as PLA and PETG.

Supported filaments and nozzle
The printer supports PLA, PETG, TPU, PLA-CF, ABS, ABS-CF, ASA, ASA-CF, PET, PET-CF, PETG-CF, PC and PA filament and selected PPS and PPA materials, so you choose the material to suit the part. The dual-gear direct extruder has a 0.4 mm brass and hardened steel nozzle with a flow rate of up to 32 mm³/s.

CoreXY motion and cast aluminium frame
Two 4260 stepper motors drive the X and Y axes on metal linear guides; the maximum speed is 500 mm/s and the recommended speed 250 mm/s. The standard acceleration of 10,000 mm/s² can be raised to 20,000 mm/s². The cast aluminium frame and base reduce vibration at high speed, and print accuracy is ±0.1 mm.


Z axis with three screws and guides
The bed is carried by three trapezoidal screws and three metal linear guides. The three-point support keeps the bed position stable from layer to layer, which matters when printing taller models.
Automatic levelling and double-sided build plate
Fully automatic calibration and automatic levelling at 121 points prepare the printer for work with fewer manual adjustments. The double-sided spring steel plate has a textured PEI side and a side made for PLA. The bed heats up to 110 °C and layer height can be set from 0.1 to 0.4 mm.

Print monitoring with a camera
The built-in camera lets you watch the print, and the filament run-out sensor and clog detection report feeding problems quickly. The printer unloads filament automatically, controls its fans and resumes the print after a power cut.
Air filter, lighting and noise
A HEPA filter with an activated carbon layer cleans the chamber air, and LED lights illuminate the interior. Quiet motor drivers on all axes keep operating noise to 45 dB in silent mode.

Touchscreen and Wi-Fi control
The printer is controlled from a 5-inch capacitive touchscreen running ELEGOO OS. Models can be prepared in ElegooSlicer, Orca or Cura, and STL, OBJ, 3MF and STEP files are accepted as input. For multi-colour printing, the printer can be upgraded with the CANVAS system, sold separately.

In the box
- 3D printer ELEGOO Centauri Carbon 2, 1 pc
- touchscreen
- spool holder
- spool holder mount
- power cord
- unclogging pin
- Allen key
- screwdriver
- filament sample
- spare nozzle wiper
- user manual
- USB flash drive
- scraper
- filament run-out sensor cable









Reviews
There are no reviews yet.