Skip to content

Shipping country

Clearance -15%

Multi-colour 3D printer Anycubic Kobra X Combo, FDM, build volume 260 × 260 × 260 mm

  • Brand:
  • Product code: IP088674
  • EAN: 6974662354020

The Kobra X Combo is an FDM printer that prints at up to 600 mm/s, and its 720p camera monitors the print with AI. It is controlled from a 3.5-inch touchscreen and connects over Wi-Fi, LAN or USB.

Free delivery

584,95 €

15+ pcs in stock

Delivery time 5-9 working days. Estimated delivery 24-30 November

You earn 1 170 points (11,70 €). Log in to see your balance. Programme terms

Delivery information

Estonia

  • Free shipping from 249,90 €
  • Courier Free
  • Omniva courier Free
  • SmartPosti courier Free

Finland

This product is not delivered to Finland.

Delivery to Estonia is possible: choose Estonia as the delivery country.

Latvia, Lithuania

  • Omniva courier 11,49 €
  • SmartPosti courier 8,49 €
  • Delivery time: 5 to 9 working days
  • Estimated delivery: 24-30 November 2026
  • When an order holds products with different delivery times, the delivery time is set by the longest one.
  • The delivery method does not change the delivery time. Delivery to some countries takes a few working days longer.
  • Free delivery from 249,90 €

The courier delivers to the front door, in an apartment building to the building's front door. Carrying the goods inside is not part of the service.

The final delivery methods and costs are calculated at checkout from the products in your basket. We always do our best to deliver every order as quickly as possible!

Payment methods

Our shop takes all the common payment methods.

Every payment goes through a secure environment and uses the current security standards of the bank or card provider (SCA, 3D Secure 2, PCI DSS). We neither see nor store your login or card details.

Pay straight from your online bank. You confirm with Smart-ID, Mobile-ID or an ID card.

The bank payment is started securely in your online bank and confirmed with SCA. Neither we nor Montonio see your login details. Banks of Estonia, Finland, Latvia, Lithuania and Poland are supported, among them Swedbank, SEB, LHV, Luminor, Coop Pank and Citadele, and also N26 and Revolut.

Visa, Mastercard, Apple Pay and Google Pay. Confirmed with 3D Secure 2.

You can pay with Visa and Mastercard cards (debit and credit), confirmed with 3D Secure 2. Card details are not stored on our servers: Montonio's partner Stripe processes them under the PCI DSS requirements. Apple Pay and Google Pay work too, where your device allows them.

You receive the invoice by e-mail and pay by bank transfer.

After you place the order we send a confirmation with the invoice by e-mail. You pay by an ordinary bank transfer and the order is not processed until the payment has arrived. To speed things up you can send us the payment confirmation after the transfer.

A machine-readable invoice delivered through the bank, for companies and institutions.

An e-invoice is a machine-readable invoice delivered through the bank, from which the bank can create a pre-filled payment order or set up an e-invoice standing order. Companies and institutions with e-invoice receipt switched on can accept it.

Don't want to pay for the whole order at once? See the flexible payment options.

You can choose between several flexible options: pay later at no extra cost, split the purchase into 3 parts or choose a longer hire purchase. There are also options for business customers, where input VAT can be reclaimed.

30 days to pay, with no interest and no fees.

Buy today and pay within 30 days; no fees are added. The decision is instant and you get the goods straight away.

Pay in 3 equal parts, no fees are added.

Split the purchase into three equal instalments, with no interest and no fees. You get the goods straight away; the first instalment is paid at checkout.

Hire purchase, 6-60 months: choose the schedule that suits you.

Choose an instalment period of 6-60 months and spread the cost flexibly. Interest and fees follow the terms of ESTO AS.

30 days to pay, no fees. Try it before you pay.

Buy today and pay within 30 days, with no interest or other fees. The first bill arrives next month, and if you like the payment can be split into 2 or 3 instalments.

Inbank hire purchase: spread the cost in monthly payments.

Choose a suitable payment schedule and spread the cost over several months. Interest and fees follow the terms of AS Inbank Finance.

Try it at home and pay only once you are happy.

Try the goods at home and pay only once you are sure of your choice. The decision is instant and the first bill comes later: especially good for furniture and home appliances, when you want to decide calmly.

Pay in 3 parts, no interest or service fee is added.

Split the purchase into three equal instalments, with no interest and no service fee. You get the goods straight away and pay the first instalment 30 days later.

Hire purchase, 6-48 months: suited to larger purchases.

Choose a payment schedule of 6-48 months and spread the cost over a longer period. Interest and fees follow the terms of Modena Estonia OÜ.

Hire purchase for businesses, 6-72 months, input VAT can be reclaimed.

Hire purchase for companies over 6-72 months. The contract is made with the company and the invoice carries VAT, which can be reclaimed as input VAT. Suited to spreading larger investments.

A first in Estonia: 3 instalments for business customers without a long contract.

A new solution that lets a company split the invoice into 3 equal parts without a classic hire purchase contract. Input VAT can be reclaimed, early repayment without fees. Ideal for short-term cash flow planning.

For businesses: a free schedule, input VAT back.

Hire purchase for companies, on a schedule of 30 days to 5 years. Repayments monthly, quarterly or yearly, early repayment without fees. The contract is made with the company and input VAT can be reclaimed.

Category:

Description

Multi-colour 3D printer for printing in up to seven colours

The FDM 3D printer Anycubic Kobra X Combo has a build volume of 260 × 260 × 260 mm. It prints in four colours from its own holder and in up to seven colours with the included ACE 2 Pro system.

Anycubic Kobra X Combo 3D printer with four filament spools on a living room tableIlluminated Anycubic Kobra X Combo holder for four filament spools

Filament drying and feeding with the ACE 2 Pro

The ACE 2 Pro dries filament at up to 65 °C, which reduces the effect of moisture on printing. Four independent brushless motors and a buffer mechanism feed and retract filament, which reduces the risk of jams. The system recognises Anycubic filament parameters and estimates the remaining material, so long prints are easier to plan. ACE GEN 2 technology shortens filament change time, cuts waste and adjusts feed parameters to the filament type.

Green printed pliers held above the Anycubic Kobra X build plate

Speed and stable construction

The recommended print speed is 300 mm/s, the maximum 600 mm/s and acceleration up to 20,000 mm/s². The X axis has a linear rail, the Y axis two linear rods and the Z axis two guides, which reduce vibration. A built-in accelerometer reduces ringing on the surface, and dynamic flow compensation improves walls, edges and fine details.

Orange translucent sheets printed on the Anycubic Kobra X Combo fanned out in a hand

Materials, nozzle and automatic levelling

The printer supports PLA, PETG, TPU, PVA, ASA, PLA-CF and PETG-CF filament. The hotend heats up to 300 °C and the bed up to 100 °C. The 0.4 mm hardened steel nozzle suits carbon fibre composite filaments, and 0.25, 0.6 and 0.8 mm nozzles can also be used. LeviQ 3.0 measures the spring steel PEI plate at 49 points, so the first layer succeeds without manual adjustment.

Multi-colour shoe printed from flexible filament on the Anycubic Kobra X Combo in gloved handsAnycubic Kobra X print head printing an orange boat model on the build plate

Camera and AI monitoring

The 720p HD camera lets you watch the print in real time. AI detects print errors, spaghetti failures and foreign objects on the build plate, so you can react to errors quickly. Skipping a damaged object lets the remaining parts finish without restarting the job. The printer detects filament run-out and tangling and resumes after a power cut.

Close-up of the Anycubic Kobra X Combo HD camera lens

Control, connectivity and noise

Models are prepared in Anycubic Slicer Next, and prints can be managed remotely with the Anycubic App. Wi-Fi works on 2.4 GHz and 5 GHz. Operating noise is up to 48 dB.

In the box

  • 3D printer Anycubic Kobra X Combo, 1 pc
  • ACE 2 Pro multi-colour system
  • frame
  • printer base
  • build plate
  • power cord
  • spool holder rollers, 4 pcs
  • spool holders, 2 pcs
  • PTFE tubes, 4 pcs
  • nozzle wiper
  • M3 × 8 screw
  • M5 × 30 screws, 8 pcs
  • cable clip
  • decorative covers, 2 pcs
  • cable cover
  • filament samples
  • lubricant
  • nozzle cleaner
  • 4 mm, 2.5 mm and 2 mm keys and a magnet
  • brush
  • user manual

Additional information

Weight 18,0 kg
Printing technology

Filament (FDM)

Print area

260 mm

Multicolour printing

Yes

Maximum print speed

600 mm/s

Maximum attachment temperature

300 °C

Compatible materials

PLA, PETG, TPU, PVA, ASA, PLA-CF, PETG-CF

Software

Anycubic Slicer Next, Anycubic App

Control screen

3.5-inch touch screen

Maximum print bed temperature

100 °C

Tip diameter

0.4 mm

Maximum acceleration

20 000 mm/s²

Number of colours

4, with ACE 2 Pro system 7

Filament changer

ACE 2 Pro

Extruder

direct drive

Camera

720p HD

Noise level

up to 48 dB

Printer dimensions

455.4 × 445.3 × 461.3 mm

Printer weight

9.5 kg

ACE 2 Pro dimensions and weight

368 × 291.5 × 236.5 mm, 3.7 kg

Features

Camera, Automatic levelling, Filament end sensor, Resume after power cut

Connectivity

Wi-Fi, USB cable, Ethernet (LAN)

  • Only a customer who bought the product from us can review it: signed in, or through the link in the e-mail we send after the order. We check the purchase against the order.
  • We read every review before it is published (rules below).
  • The average rating is the plain average of all published ratings.
  • The buyer receives loyalty points for an approved review, whatever its rating or content. Text and a photo earn extra points. Reviews that earned points are marked.

  1. Write about the product and your own experience with it.
  2. A review may not contain personal data, links or advertising.
  3. Offensive or unlawful content is not allowed.
  4. Whether a review is published never depends on its rating.
  5. A photo must be taken by you, and the product must be clearly visible on it.
  6. A photo may not show people who can be recognised, or personal data such as documents, addresses or number plates.
  7. If we do not publish a photo, we send the reviewer the reason by e-mail.

Reviews

There are no reviews yet.

Bought this product from us? Sign in, or open the link in the e-mail we send after the order.

Suitable accessories

More from the same brand

See all AnyCubic products (8)

Similar products

See also:

Newsletter

New collections first

Only useful and necessary news: new products, items back in stock and member offers. No spam.

Create account

A link for setting your password will be sent to your e-mail address.

We send only useful and necessary information, and you can unsubscribe with one click. You confirm by e-mail before the first letter.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Menu

Shipping country

AssistantBETA

AI helper

Hi!

I am your AI assistant! Ask me freely, in your own words, what you would like to find or what more information you need, and I will gladly help you!

You can also choose one of these:

    Cart

    Your cart is empty.