Skip to content

Shipping country

Clearance -15%

Multi-colour 3D printer Anycubic Kobra S1 ACE 2 Pro Combo, FDM, build volume 250 × 250 × 250 mm

  • Brand:
  • Product code: IP090172
  • EAN: 6974662353887

With the included ACE 2 Pro module, the Anycubic Kobra S1 FDM printer prints automatically in four colours and dries filament at up to 65 °C. The enclosed printer has a build volume of 250 × 250 × 250 mm and a top print speed of 600 mm/s.

Free delivery

545,95 €

15+ pcs in stock

Delivery time 5-9 working days. Estimated delivery 24-30 November

You earn 1 092 points (10,92 €). Log in to see your balance. Programme terms

Delivery information

Estonia

  • Free shipping from 249,90 €
  • Courier Free
  • Omniva courier Free
  • SmartPosti courier Free

Finland

This product is not delivered to Finland.

Delivery to Estonia is possible: choose Estonia as the delivery country.

Latvia, Lithuania

  • Omniva courier 11,49 €
  • SmartPosti courier 8,49 €
  • Delivery time: 5 to 9 working days
  • Estimated delivery: 24-30 November 2026
  • When an order holds products with different delivery times, the delivery time is set by the longest one.
  • The delivery method does not change the delivery time. Delivery to some countries takes a few working days longer.
  • Free delivery from 249,90 €

The courier delivers to the front door, in an apartment building to the building's front door. Carrying the goods inside is not part of the service.

The final delivery methods and costs are calculated at checkout from the products in your basket. We always do our best to deliver every order as quickly as possible!

Payment methods

Our shop takes all the common payment methods.

Every payment goes through a secure environment and uses the current security standards of the bank or card provider (SCA, 3D Secure 2, PCI DSS). We neither see nor store your login or card details.

Pay straight from your online bank. You confirm with Smart-ID, Mobile-ID or an ID card.

The bank payment is started securely in your online bank and confirmed with SCA. Neither we nor Montonio see your login details. Banks of Estonia, Finland, Latvia, Lithuania and Poland are supported, among them Swedbank, SEB, LHV, Luminor, Coop Pank and Citadele, and also N26 and Revolut.

Visa, Mastercard, Apple Pay and Google Pay. Confirmed with 3D Secure 2.

You can pay with Visa and Mastercard cards (debit and credit), confirmed with 3D Secure 2. Card details are not stored on our servers: Montonio's partner Stripe processes them under the PCI DSS requirements. Apple Pay and Google Pay work too, where your device allows them.

You receive the invoice by e-mail and pay by bank transfer.

After you place the order we send a confirmation with the invoice by e-mail. You pay by an ordinary bank transfer and the order is not processed until the payment has arrived. To speed things up you can send us the payment confirmation after the transfer.

A machine-readable invoice delivered through the bank, for companies and institutions.

An e-invoice is a machine-readable invoice delivered through the bank, from which the bank can create a pre-filled payment order or set up an e-invoice standing order. Companies and institutions with e-invoice receipt switched on can accept it.

Don't want to pay for the whole order at once? See the flexible payment options.

You can choose between several flexible options: pay later at no extra cost, split the purchase into 3 parts or choose a longer hire purchase. There are also options for business customers, where input VAT can be reclaimed.

30 days to pay, with no interest and no fees.

Buy today and pay within 30 days; no fees are added. The decision is instant and you get the goods straight away.

Pay in 3 equal parts, no fees are added.

Split the purchase into three equal instalments, with no interest and no fees. You get the goods straight away; the first instalment is paid at checkout.

Hire purchase, 6-60 months: choose the schedule that suits you.

Choose an instalment period of 6-60 months and spread the cost flexibly. Interest and fees follow the terms of ESTO AS.

30 days to pay, no fees. Try it before you pay.

Buy today and pay within 30 days, with no interest or other fees. The first bill arrives next month, and if you like the payment can be split into 2 or 3 instalments.

Inbank hire purchase: spread the cost in monthly payments.

Choose a suitable payment schedule and spread the cost over several months. Interest and fees follow the terms of AS Inbank Finance.

Try it at home and pay only once you are happy.

Try the goods at home and pay only once you are sure of your choice. The decision is instant and the first bill comes later: especially good for furniture and home appliances, when you want to decide calmly.

Pay in 3 parts, no interest or service fee is added.

Split the purchase into three equal instalments, with no interest and no service fee. You get the goods straight away and pay the first instalment 30 days later.

Hire purchase, 6-48 months: suited to larger purchases.

Choose a payment schedule of 6-48 months and spread the cost over a longer period. Interest and fees follow the terms of Modena Estonia OÜ.

Hire purchase for businesses, 6-72 months, input VAT can be reclaimed.

Hire purchase for companies over 6-72 months. The contract is made with the company and the invoice carries VAT, which can be reclaimed as input VAT. Suited to spreading larger investments.

A first in Estonia: 3 instalments for business customers without a long contract.

A new solution that lets a company split the invoice into 3 equal parts without a classic hire purchase contract. Input VAT can be reclaimed, early repayment without fees. Ideal for short-term cash flow planning.

For businesses: a free schedule, input VAT back.

Hire purchase for companies, on a schedule of 30 days to 5 years. Repayments monthly, quarterly or yearly, early repayment without fees. The contract is made with the company and input VAT can be reclaimed.

Category:

Description

Multi-colour 3D printer with an enclosed CoreXY body

The filament-based multi-colour 3D printer Anycubic Kobra S1 ACE 2 Pro Combo prints with FDM technology and has a build volume of 250 × 250 × 250 mm. It has an enclosed CoreXY design whose closed chamber keeps the temperature even when printing ABS and ASA, so parts warp less.

Anycubic Kobra S1 ACE 2 Pro Combo 3D printer with a four-spool module on top

The ACE 2 Pro module changes filament automatically

The included ACE 2 Pro module changes colours itself, so four-colour models print without manual filament changes. With additional ACE 2 Pro modules the system expands to up to 16 colours.

ACE 2 Pro multi-colour module with four coloured spools under a clear lidFour filament spools in different colours and guide tubes in the ACE 2 Pro, top viewFour assigned colours of the ACE 2 Pro and the automatic feed diagram for the Anycubic Kobra S1Four filament tubes joining the common feed mechanism of the Anycubic Kobra S1Anycubic Kobra S1 printing a house model surrounded by four ACE modules

Filament drying

The ACE 2 Pro module dries filament at up to 65 °C, also while printing. Built-in temperature and humidity sensors monitor the conditions inside the module and active moisture removal keeps the filament dry.

Filament spool in the clear housing of the ACE 2 Pro module while dryingClear housing of the ACE 2 Pro module with the internal airflow highlighted

Speed and automatic levelling

Top print speed is 600 mm/s with 20,000 mm/s² acceleration; the recommended working speed is 300 mm/s. LeviQ 3.0 automatic levelling calibrates the build plate without manual adjustment. Resonance compensation uses a built-in accelerometer to reduce vibration, and flow correction reduces excess material in corners.

Cross-section of the Anycubic Kobra S1 showing cooling airflow in the chamberFrame of the Anycubic Kobra S1 with print head guide rails and motion axes

Filaments and temperatures

A nozzle that heats up to 320 °C and a bed heated up to 120 °C suit PLA, PETG, ABS, ASA and TPU filament. TPU is fed directly into the printer, bypassing the ACE 2 Pro module. The standard nozzle is 0.4 mm, and 0.2, 0.6 and 0.8 mm nozzles can also be used.

Monitoring and remote control

AI monitoring detects filament piling up uncontrolled during a print and foreign objects in the work area; the printer also monitors belt tension and resumes printing after a power cut. It is operated from the 4.3-inch touchscreen or the Anycubic App, which starts and monitors prints and shows time-lapse videos. Models are prepared in Anycubic Slicer Next, based on Orca Slicer, and sent to the printer over 2.4 GHz Wi-Fi.

Noise and space needed

Noise is 44 dB in quiet mode, 46 dB in standard mode and up to 55 dB while drying filament. The printer with the ACE 2 Pro module needs a workspace of 420 × 530 × 710 mm.

In the box

  • 3D printer Anycubic Kobra S1, 1 pc
  • ACE 2 Pro multi-colour module, 1 pc
  • Spool holder
  • Signal cable
  • Filament guide tubes, 4 pcs
  • Power cables, 2 pcs
  • M2.5 × 25 screws, 2 pcs
  • M3 × 6 screws, 2 pcs
  • Allen keys 1.5, 2.0 and 2.5 mm
  • Filament sample
  • Activated carbon filter
  • Nozzle anti-clog module
  • Nozzle cleaning module
  • Silicone nozzle cover
  • Nozzle cleaner
  • Cable organisers, 2 pcs
  • Lubricant

Additional information

Weight 22,0 kg
Tip diameter

0.4 mm

Maximum print speed

600 mm/s

Layer thickness

0.08–0.28 mm

Compatible materials

PLA, PETG, ABS, ASA, TPU

Software

Anycubic Slicer Next, Orca Slicer

Print area dimensions

250 × 250 × 250 mm

Number of colours

4 (expandable to 16)

Recommended print speed

300 mm/s

Maximum acceleration

20 000 mm/s²

Maximum attachment temperature

320 °C

Print plate maximum temperature

120 °C

Supported nozzles

0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm

Filament drying

up to 65 °C

File formats

STL, OBJ, 3MF

Noise level

44 dB quiet, 46 dB standard mode

Screen

4.3-inch touchscreen

Printer dimensions

400 × 410 × 490 mm

Printer weight

18 kg

ACE 2 Pro dimensions

368 × 291.5 × 236.5 mm

ACE 2 Pro weight

3.7 kg

Print area

250 mm

Multicolour printing

Yes

Closed enclosure

Yes

Connectivity

Wi-Fi, USB cable

Features

Automatic levelling, Resume after power cut, Air filter

Printing technology

Filament (FDM)

  • Only a customer who bought the product from us can review it: signed in, or through the link in the e-mail we send after the order. We check the purchase against the order.
  • We read every review before it is published (rules below).
  • The average rating is the plain average of all published ratings.
  • The buyer receives loyalty points for an approved review, whatever its rating or content. Text and a photo earn extra points. Reviews that earned points are marked.

  1. Write about the product and your own experience with it.
  2. A review may not contain personal data, links or advertising.
  3. Offensive or unlawful content is not allowed.
  4. Whether a review is published never depends on its rating.
  5. A photo must be taken by you, and the product must be clearly visible on it.
  6. A photo may not show people who can be recognised, or personal data such as documents, addresses or number plates.
  7. If we do not publish a photo, we send the reviewer the reason by e-mail.

Reviews

There are no reviews yet.

Bought this product from us? Sign in, or open the link in the e-mail we send after the order.

Suitable accessories

More from the same brand

See all AnyCubic products (8)

Similar products

See also:

Newsletter

New collections first

Only useful and necessary news: new products, items back in stock and member offers. No spam.

Create account

A link for setting your password will be sent to your e-mail address.

We send only useful and necessary information, and you can unsubscribe with one click. You confirm by e-mail before the first letter.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Menu

Shipping country

AssistantBETA

AI helper

Hi!

I am your AI assistant! Ask me freely, in your own words, what you would like to find or what more information you need, and I will gladly help you!

You can also choose one of these:

    Cart

    Your cart is empty.