Description
Soap dispenser BLANCO LATO for the sink
The sink soap dispenser BLANCO LATO is a surface-mounted pump with its bottle under the worktop in the sink cabinet. The brass body has a PVD finish in satin dark steel. BLANCO designs its metallic dispensers to match a BLANCO tap and sink of the same shade. The dispenser stands 94 mm above the worktop and its base is 45 mm in diameter.
Compatibility and installation
The bottle reaches 221 mm below the top of the worktop and is 59 mm in diameter. Put the body with its seal into the hole from above, fit the washer and nut from below and tighten the nut with pliers. Then screw the bottle onto the thread from below and insert the pump from above.
Filling and care of the washing-up liquid dispenser
To fill it, pull the pump out upwards and pour the liquid in from above. BLANCO’s instructions mix washing-up liquid with water 1:1. Watch that nothing overflows while filling. Press the pump head down to dispense.
Clean the dispenser with the soft side of a sponge. To remove limescale, spray on a descaler, leave it briefly, wipe with a damp cloth and dry with a microfibre cloth; test the product on a hidden spot first. Do not use chlorine cleaners or the scouring side of a sponge. Keep large pots clear of the spout when lifting them into the sink.
In the box
- Soap dispenser BLANCO LATO, 1 pc
- Fixing material
Needed separately
Installation needs a hole drilled in the sink or worktop if there is not one already.



Reviews
There are no reviews yet.