Description
Soap dispenser BLANCO LATO in chrome-plated brass
The BLANCO LATO soap dispenser is a washing-up liquid dispenser for the kitchen sink with a brass body and a galvanic chrome finish. Above the worktop you see a 94 mm high pump on a round base 45 mm across; the bottle sits below the worktop. BLANCO designed the LATO finishes to match BLANCO kitchen taps and sinks.
Installation in a sink or worktop hole
The dispenser fits a hole of 27–35 mm in diameter, so it can go into a spare sink hole or the worktop. The bottle needs 221 mm of free height and 59 mm of width below the worktop. Place the seal on the hole, fix the dispenser from below with the nut and tighten the nut with pliers. Then screw the bottle on by hand from below and push the pump into place from above.
Use and care
To refill, lift the pump out from above, so the bottle stays under the worktop. After refilling, press the pump head until liquid comes from the spout. After the first filling, pour a little water on the dispenser base and check from below that the seal is watertight. Clean it with a soft cloth or the soft side of a sponge.
In the box
- Soap dispenser BLANCO LATO, 1 pc
- Washing-up liquid bottle
- Adjustable fixings
Needed separately
Tightening the fixing nut needs ordinary water pump pliers.




Reviews
There are no reviews yet.