Description
Liquid metal thermal paste for processors, graphics cards and laptops
Conductonaut is a eutectic alloy based on tin, gallium and indium. As a liquid without solid particles, it fills surface unevenness down to the nanometre range, leaving a very thin layer between the processor and the cooler. The manufacturer lists processors, graphics cards, laptops and integrated circuits as typical applications.
Suitable surfaces and electrical conductivity
The alloy suits a nickel-plated copper processor lid, a copper cooler base and bare silicon dies. Coolers with direct heatpipe contact need a copper base, and for the best long-term performance the manufacturer recommends a cooler with a nickel-plated copper base. Conductonaut conducts electricity, so the components around the die are covered with an insulation sheet.
Application
The alloy can be applied at 8–150 °C, and the applied layer works at −50 to +200 °C. Clean the processor and cooler surfaces with the supplied cleaning pad; both must be dry and free of residue. Fit the metal needle to the syringe and apply a pinhead-sized amount to both the processor and the cooler. Spread the alloy thinly over both surfaces with a cotton swab, then mount the cooler. Store the syringe in its original packaging in a dry place at room temperature.
In the box
- syringe with 1 g of liquid metal
- metal needle for application
- plastic needle for drawing back excess alloy
- 2 lint-free industrial cotton swabs
- 2 alcohol cleaning pads





Reviews
There are no reviews yet.