Description
Vertical wall-mounted cooker hood with an angled glass front
The vertical wall-mounted cooker hood is fixed to the wall above the hob and sends the air that has passed the grease filter outside through a duct, or back into the room through an odour filter in recirculation mode. The hood is set to extraction at the factory; recirculation needs the recirculation kit DWZ1GK1U2 and the odour filter DWZ1GK1A2. The three normal speed settings give an airflow of 220 to 430 m³/h.
Touch control panel
The touch panel has an on/off button, three speed buttons, an intensive mode button and a light button. Intensive mode is meant for strong smells or steam and returns to the previous setting after about 6 minutes. The two 3 W LED lamps with a colour temperature of 4000 K switch on and off independently of the fan. The saturation indicator flashes a number when the grease filter needs cleaning or the odour filter needs replacing.
Installation
The hood is mounted centrally above the hob and must be at least as wide as the hob. On one side it may stand directly next to a tall unit, wall unit or wall if the gap is at least 50 mm. The supplied screws and plugs suit solid masonry, aerated concrete and Poroton bricks; the hood must not be fixed directly to plasterboard. The recommended duct diameter is 150 mm, the minimum 120 mm, and the duct must fall away from the hood at an angle of at least 1°.
Cleaning and care
To reach the grease filter, lift the glass front until it locks open on its hinges. Clean the aluminium grease filter every 2 months, by hand with hot soapy water and a brush or in the dishwasher at up to 70 °C. In recirculation mode replace the odour filter every 3 months at about one hour of daily use, as it cannot be cleaned. Clean the glass with a soft cloth and glass cleaner, and the control panel with a damp sponge cloth and hot soapy water.
In the box
- Wall-mounted cooker hood
- Chimney cover
- Grease filter
- Chimney cover bracket
- 6 wall plugs ø 8 × 40 mm
- 6 screws ø 5 × 45 mm
- 2 washers ø 16 mm
- 2 screws 3.5 × 5 mm
- User and installation manual






Reviews
There are no reviews yet.