Description
3D printer for large models and technical filaments
The enclosed 3D printer QIDI Max 4 prints filament using FDM technology and has a build volume of 390 × 390 × 340 mm. It works with the QIDI Box filament changer, which lets you print several colours in one model.

Enclosure and chamber heating for technical filaments
The print head reaches up to 370 °C and the bed up to 120 °C. Inside the enclosure, third-generation PTC chamber heating keeps the air at up to 65 °C so that warp-prone materials hold their shape.

Filaments, nozzles and build plate
The printer handles PLA, ABS, ASA, PETG, TPU, PA and PC as well as carbon and glass fibre reinforced polymers. The standard bimetal nozzle is 0.4 mm; 0.2, 0.6 and 0.8 mm nozzles are also available. The extruder is direct drive with hardened steel dual gears. The bed is an aluminium plate with silicone heating, topped by a double-sided textured PEI plate.


CoreXY frame and closed-loop motors
The print head moves on a CoreXY system with 10 mm wide belts driven by FOC closed-loop stepper motors. Maximum print speed is 800 mm/s and acceleration 30,000 mm/s². The X axis runs on a high-hardness linear rail and the Y axis on 12 mm steel shafts. The Z axis is driven by two independent lead-screw motors on four 12 mm steel shafts.


Automatic levelling and print monitoring
Automatic bed levelling uses a load cell built into the hotend. A run-out sensor sits above the extruder. The AI camera detects print failures, and after a power cut the printer resumes the unfinished job. The camera records up to 1080p and supports timelapse.

Air filter, touchscreen and connectivity
The three-stage air filter combines a G3 pre-filter, a HEPA H12 filter and coconut shell activated carbon. The printer is operated from a 5-inch 800 × 480 touchscreen. Print files reach the printer over 2.4/5 GHz Wi-Fi, Ethernet or USB and are stored in 32 GB of eMMC memory. QIDI Studio, OrcaSlicer and PrusaSlicer can be used for slicing, with STL, OBJ, 3MF, STEP and STP files.

In the box
- 3D printer QIDI Max 4, 1 pc
- Filament holder with pneumatic head
- Filament spool holder
- Holder cover
- Enclosure door handle
- Spare parts kit
- Mechanism maintenance oil
- 7 mm spanner
- Power cord
- Ethernet cable
- USB flash drive with software and files
- Flat screwdriver
- Bed adhesive
- Set of hex keys
- Scraper for removing prints



Reviews
There are no reviews yet.