Description
3D printer for technical and fibre-reinforced filaments
The enclosed 3D printer QIDI Q2C prints filament using FDM technology and has a build volume of 270 × 270 × 256 mm. It works with the QIDI Box filament changer, which lets you print several colours in one model.


Hotend and supported filaments
The ceramic plate heated hotend goes from 30 °C to 220 °C in 40 seconds and reaches up to 370 °C. The bimetal nozzle is 0.4 mm, with 0.2, 0.6 and 0.8 mm nozzles available. The printer handles PLA, ABS, ASA, PETG, TPU, PA and PC as well as glass and carbon fibre filled polymers. The extruder has hardened steel dual gears with an 8.9:1 ratio.


CoreXY frame and automatic levelling
Maximum print head speed is 600 mm/s with an acceleration of 20,000 mm/s². The X axis has a high-hardness linear rail, the Y axis 8 mm hollow steel shafts, and the Z axis is driven by two independent lead-screw motors on 10 mm shafts. Automatic bed levelling uses a load cell integrated into the hotend. The heated aluminium bed reaches up to 120 °C and carries a double-sided magnetic PEI plate.


Sensors, controls and connectivity
A filament run-out sensor sits above the extruder, the printer has a filament cutter and it resumes an unfinished job after a power cut. The printer can be controlled from the 4.3-inch touchscreen, a mobile app or a PC application. Files reach the printer over 2.4 GHz Wi-Fi, Ethernet or USB and are stored in 32 GB of eMMC memory. QIDI Studio, OrcaSlicer and PrusaSlicer can be used for slicing on Windows, macOS and Linux.



Reviews
There are no reviews yet.