Paper shredder accessories
Shredder oil: bottle size, the right oil and how often to oil
Shredder oil lubricates the cutting blades so that the shredder cuts evenly and paper does not get stuck between the blades. The range includes Fellowes, HSM, HP and Activejet shredder oils in an applicator bottle, whose narrow tip lets you spread the oil across the whole paper opening.
Volume: small or large bottle
A small bottle (120-125 ml) suits a home or small office shredder that is used now and then. A larger bottle (250-355 ml) suits an office where the shredder runs every day and the paper bin is emptied often. You can choose by bottle size using the Volume filter.
Which oil suits a shredder
A cross-cut shredder needs a vegetable-based shredder oil, which Fellowes also recommends for its shredders. Spray oils are petroleum-based and create a fire risk in a shredder, so use the shredder oil sold in a bottle.
How often to oil
With heavy use, oil a cross-cut shredder every time you empty the paper bin. A shredder that is used now and then needs oiling about once every two months. It is also time to oil when the shredder cuts with difficulty or paper often gets stuck.
How to oil
Hold down the shredder’s reverse button and drip the oil evenly across the whole paper opening. Keep the button held for about another 10 seconds so the oil reaches between all the cutting blades. To find a new shredder, see the Paper shredders page, and for office paperwork also see Laminators.
Frequently asked questions
A vegetable-based shredder oil suits a shredder. Spray oils are petroleum-based and, according to Fellowes’ maintenance guide, a serious fire hazard, so keep them away from the shredder.
Oil a cross-cut shredder that runs every day each time you empty the paper bin. A shredder used rarely needs oiling about once every two months.
The most common cause is too thick a stack of paper, a sheet that is folded over or creased, or a new stack fed in before the previous one has been cut through. If the shredder cuts with difficulty even at the correct amount, the cutting blades need oil.
The DIN 66399 security level shows how small the pieces are that the shredder cuts paper into. P-4 pieces are up to 160 mm², P-5 up to 30 mm² and P-7 up to 5 mm². P-4 suits invoices, customer data and tax documents.
-
-
5,99 €
- Volume
- 250 ml
-
-
-
All products shown.