Description
Cordless chainsaw for felling small trees and cutting logs
The Einhell GE-LC 18 Li Kit is a cordless chainsaw with a 25 cm guide bar that runs on a Power X-Change 18 V Li-ion battery; a 3000 mAh battery and charger are included. It is designed for felling small trees and for cutting trunks, branches, beams and boards with both rip and cross cuts, with a maximum cutting length of 23 cm.
Tool-free chain tensioning and automatic oiling
You fit and tension the chain by hand: a hand-turned knob holds the sprocket cover and the tensioning wheel next to it sets the tension. With the correct tension the chain can be lifted 3–4 mm at the middle of the bar. The chain is oiled automatically from a 200 ml oil tank with a MIN-marked window on the side, and one filling lasts about 15 minutes on average.
Chain brake and hand guards
The chain brake is triggered by the front hand guard and stops the chain in less than 0.1 seconds in the event of kickback. When you release the switch the motor brakes the chain quickly, the front and rear hand guards protect the fingers from the chain, and the saw starts only when you press the lock-off button and the switch together. When the battery runs flat, a protective circuit switches the saw off.
Cleaning and care
Remove the battery before every cleaning. Clean the tensioning mechanism with compressed air or a brush, keep the handles free of oil and wipe the housing with a damp cloth and, if needed, a mild detergent. If the saw is not used for a longer period, empty the oil tank, dip the chain and guide bar briefly in an oil bath and wrap them in oiled paper.
In the box
- Cordless chainsaw GE-LC 18 Li
- Guide bar with adapter plate
- Saw chain
- Bar cover
- Power X-Change Li-ion battery
- Charger













Reviews
There are no reviews yet.