Description
Brushless cordless pruning saw for branches and logs
This Power X-Change brushless pruning saw is designed for cross and rip cuts in trunks, branches, wooden beams and boards. The top of the guide bar is covered by a folding chain cover that lifts up for changing the chain. The battery fits at the end of the rear handle and is released by pressing the pushlock button down.
Fitting the guide bar and chain
Undo the chain wheel cover fixing knob and remove the cover. Lay the chain in the groove of the guide bar, place the bar and chain on the saw, guide the chain around the chain wheel and refit the cover with the knob. The chain is tensioned at the tensioning screw with the hex key until it can be lifted 2–3 mm in the middle of the bar, and only then is the fixing knob tightened fully. As the chain warms up and lengthens, check the tension every 10 minutes while working.
Lubricating the chain with chain oil
At the start of work, apply 5 drops of chain oil to the sliding face between chain and bar. Repeat after about 5 minutes, depending on the number and size of cuts, and use the supplied dosing aid to apply the oil.
Cleaning and storage
Clean the chain tensioning mechanism regularly with compressed air or a brush and keep the handles free of oil. The housing can be cleaned with a damp cloth and mild washing-up liquid when needed. For longer storage, dip the chain and bar briefly in an oil bath and wrap them in oil paper. Store the saw and its accessories in a dark, dry, frost-free place at 5–30 °C.
In the box
- Cordless pruning saw Einhell GE-PS 18/15 Li BL
- Saw chain
- Guide bar
- Bar cover
- Hex key
- Chain oil dosing aid
- Operating instructions and safety instructions
Battery and charger are not included.







Reviews
There are no reviews yet.