Description
Automatic heat press with a pull-out pressing base for T-shirts and bags
The HTVRONT Auto1 HPM15 automatic heat press transfers heat transfer vinyl, sublimation paper and heat transfer paper designs onto T-shirts, bags, cushions and backpacks with a 38.1 × 38.1 cm heating plate.


Materials and preset modes
The maker recommends 145–155 °C and 15 s for PVC and PU vinyl, 150–160 °C and 15 s for glitter vinyl, 180–200 °C and 35–45 s for sublimation paper and 150–160 °C and 15 s for heat transfer paper. The mode button selects one of four preset modes: 150 °C and 15 s, 160 °C and 15 s, 165 °C and 20 s or 200 °C and 40 s. Two custom modes can be saved.


Setting temperature and time
A short press changes the temperature by 5 °C and the time by 1 second; a long press changes the value continuously in steps of 5. Temperature can also be shown in Fahrenheit, and memory mode keeps the settings for the next use.


Pull-out pressing base and auto mode
The pressing base with handle pulls out from under the heating plate, so fabric can be laid out away from the hot plate. In auto mode the plate presses down as soon as the base is pushed back in, without pressing the start button. For storage, holding the time and decrease buttons for 3 seconds closes the heating plate and the pressing base.

Use
Switch the press on, set temperature and time and wait until the start button turns from red to green. Pull out the base, place the fabric on the pressing mat and press it smooth with the press. Then place the design on the fabric, cover it with the Teflon sheet, push the base fully back and press the start button; pressing ends when the timer runs out.
Auto shut-off and emergency stop
If the press is not used for 15 minutes, it switches itself off, beeping and flashing during the last 10 seconds. While the heating area is closing, pressing any button stops it and opens the heating area again.
Cleaning and care
Before cleaning, switch the press off, unplug it and let the housing cool completely. Dry the housing with a soft dry cloth without cleaning agents and keep the press in a clean, ventilated place.
In the box
- Heat press HTVRONT Auto1 HPM15, 1 pc
- Pressing mat, 1 pc
- Teflon sheet, 1 pc
- User manual, 1 pc





Reviews
There are no reviews yet.