Description
Automatic cap press that lifts the hat platen to the heating plate by itself
At a tap of the R button, the HTVRONT A300 Auto automatic cap press lifts the hat platen against the heating plate and lowers it when the timer ends, signalling with three beeps. As the press works on its own, you can prepare the next cap while it presses.

Two preset modes
The press offers preset modes for heat transfer vinyl and embroidered patches: mode A is 150 °C and 15 s, mode B 170 °C and 20 s. Temperature and time can be changed in both modes, and in custom settings the time can be set within 1–999 seconds. The press remembers the last temperature and time settings and switches off if it is not used for 15 minutes.

Two interchangeable hat platens
The box holds two differently shaped hat platens: the larger one, fitted to the press, measures 8 × 15 cm and the smaller one 7 × 17 cm. To change the platen, push the cooled heating plate back, remove the old platen, align the new one with the mounting slot and press it firmly down.

Suitable materials
You can apply DTF film and sublimation paper, heat transfer vinyl, transfer paper for light and dark fabrics, embroidered patches and hotfix rhinestones to caps. DTF film is a design printed onto film that is transferred to fabric with heat and pressure.

Use
Wearing the supplied heat-resistant gloves, switch the press on, choose the temperature and time or a preset mode and wait for the press to heat up. Push the heating plate back by its top handle, fix the design on the cap and secure the cap on the platen with the hat stretcher. When the temperature is reached, pull the plate over the design and tap the R button: the platen rises automatically. Touching any button during pressing stops the cycle and lowers the hat platen.


Cleaning and storage
Before cleaning, unplug the power cord and let the press cool down completely. Wipe the press with a soft, dry cloth without detergents, and store it in a cool, ventilated place when not in use.

In the box
- Heat press HTVRONT A300 Auto, 1 pc
- Large hat platen 8 × 15 cm, fitted to the press, 1 pc
- Small hat platen 7 × 17 cm, 1 pc
- Power cord, 1 pc
- Heat-resistant gloves, 1 pair
- User manual



Reviews
There are no reviews yet.