Description
Smart lock that opens with a touch, a PIN code or your phone
The Shelly LOQED Touch 2S smart lock fits doors with a Euro profile cylinder up to 110 mm thick, or up to 55 mm measured from the cylinder fixing screw to the inside, and replaces the existing cylinder and inside handle. Its motor locks and unlocks the door in 2 seconds, and the lock connects to your phone and home network over Bluetooth and Wi-Fi.

Keyless unlocking and locking
When an authorised phone is within Bluetooth range, one touch on the outside panel opens the door. The keypad on the outside panel opens the door with a PIN code, and the door also opens from the app or with auto unlock, which opens the door when it detects an authorised smartphone. To lock, touch the outside panel within 5 seconds of closing the door, press it and hold, or use the app.

Access for family and guests
In the app you can send digital keys to family members, share an access link with guests and set a schedule for who has access and when. The app shows the lock status in real time, sends a notification each time the door opens and locks or unlocks the door at a set time. The Shelly BLU Button Tough 1 can also be paired with the lock to open the door without a key.

Smart door lock in a Shelly smart home
In the Shelly Smart Control app you can create automations based on the lock status, for example switching on the lights or opening the blinds when you come home. For voice control the lock supports Google Assistant and Amazon Alexa. Remote control runs through the included Wi-Fi bridge, which plugs into a socket within 3 m of the lock.

Stainless steel housing and IP65 outside panel
The lock housing is stainless steel with anti-drill protection in hardened steel. The outside touch module is rated IP65, meaning dust-tight and protected against water jets. Communication between the phone and the lock is end-to-end encrypted.

Battery power and 9 V emergency power
The lock runs on eight included 1.5 V AA batteries for up to 1 year. If the batteries run flat, hold a 9 V battery against the two metal contacts on the outside panel and open the door with your PIN code.
Also fits multi-point locks
The handle-to-cylinder centre distance can be 55, 72, 92 or 110 mm, and the cylinder must sit at least 30 mm from the door edge. The lock works with three, five or seven bolt multi-point locks, doors that lock by lifting the handle and designs where the cylinder sits above the handle.

Installation
To install, remove the inside door handle, the cylinder fixing screw, the cylinder and the door fittings. Feed the outside module cable through the door, fix the module, then slide the LOQED cylinder over the cable and secure it with the supplied screw. Next fit the inside module base and the motor module, which goes upside down for a centre distance of 92 mm or more, connect the cables, insert the batteries and fit the cover plate, steel housing and handle. Finally plug the Wi-Fi bridge into a socket and set up the lock in the LOQED app. Besides the supplied small screwdriver and hex key you need a large cross-head screwdriver and a flat-head screwdriver.
Maintenance
Check the lock for wear, use a lubricant suitable for locks and keep the lock firmware and app up to date.
In the box
- Shelly LOQED Touch 2S smart lock, 1 pc
- outside touch module with mounting block and spacer
- LOQED cylinder
- motor module, inside module cover and steel housing
- handle and handle ring
- 3 cover plates, 2 large and 4 small rings
- 4 outside module screws and 3 motor module screws
- Wi-Fi bridge
- 8 AA batteries
- hex key and screwdriver

Reviews
There are no reviews yet.