Description
Ecovacs D-CC03-0029 washable cleaning cloths for X1 Plus/T10/T10 Plus/N20
The Ecovacs D-CC03-0029 washable cleaning cloths are designed for wet cleaning with DEEBOT X1 Plus, T10, T10 Plus and N20 series robot vacuums. The three microfibre mop cloths in the set help restore the robot’s cleaning performance when the original cloths are worn or dirty. Reusable cloths reduce accessory costs and avoid the waste generated by disposable mop pads.
Product overview
These original Ecovacs washable mop cloths attach to the robot’s mop module and ensure even moisture and dirt pickup from hard floor surfaces. The microfibre structure binds dust and finer dirt, while the semicircular shape, matched precisely to the DEEBOT X1/T10/N20 mop plate, allows the cloth to reach as close as possible to the wall edges. As this is a passive accessory with no electronics, there is no additional energy consumption; only the robot itself uses energy.
Key features
- Original Ecovacs accessory: mop cloths specially designed by the manufacturer for the X1 Plus, T10, T10 Plus and N20 series.
- Washable and reusable: the cloths withstand multiple wash cycles, reducing ongoing costs and the amount of waste.
- Microfibre cleaning surface: polyester microfibre effectively binds dust, limescale and other finer dirt from hard floors.
- Precise fit: the semicircular edge and integrated attachment areas ensure a secure fit on the corresponding mop module.
- Three cloths in the set: one in use, one in the wash and a third spare, so the robot is always ready to work.
- Not an electronic product: there are no motors, sensors or battery, so the product has no separate energy consumption and no WEEE obligation.
Technical data
- Manufacturer: Ecovacs Robotics
- Product series: washable cleaning cloths for DEEBOT robots
- Product code: D-CC03-0029
- Compatibility: DEEBOT X1 Plus, DEEBOT T10, DEEBOT T10 Plus, DEEBOT N20 series (N20 Family)
- Quantity in package: 3 washable cleaning cloths
- Net weight: approx. 0.021 kg (3 cloths in total)
- Gross weight with packaging: approx. 0.093 kg
- Package dimensions (approximate): height 265 mm, width 130 mm, depth 30 mm
- Material: polyester microfibre (cleaning surface) and plastic/fabric attachment parts
- Colour: light grey microfibre with blue diagonal stripes and white attachment strips
- Energy consumption: none (passive cleaning cloth, energy consumption depends only on the robot)
Is this suitable for your needs?
This accessory suits users who have an Ecovacs DEEBOT X1 Plus, T10, T10 Plus or N20 series robot and regularly use the wet cleaning function. If you want to maintain your robot’s cleaning performance, avoid leaks or poor cleaning caused by unsuitable third-party cloths, and keep costs under control thanks to washable accessories, this set is a practical choice. This product may not suit other manufacturers’ robots or other Ecovacs models, so always check your robot’s exact model.
Installation and compatibility
The cloth attaches to the robot’s original mop module in the manner intended by the manufacturer (e.g. hook-and-loop tape or sliding attachment). Thanks to the original dimensions, the cloth fully covers the mop plate and does not get in the way of the wheels or create a “tail” under the robot that could affect navigation. Compatibility is guaranteed with the following devices:
- DEEBOT X1 Plus
- DEEBOT T10
- DEEBOT T10 Plus
- DEEBOT N20 series (N20 Family)
For other robot models, compatibility is not guaranteed and the accessory is not recommended.
Instructions for use
When using the product, follow the official user manual for your DEEBOT robot and mop module, but the general principles are as follows:
- Remove the mop module from the robot and attach a clean cloth to the module so that it covers the entire mop surface.
- Make sure the mop cloth is straight and taut; the edges must not extend over the wheels or sensors.
- Fill the robot’s water tank according to the manual. Use only water or cleaning agents permitted by the manufacturer.
- Select mop mode from the app or the robot’s menu and let the robot clean the floor.
- After cleaning, remove the cloth and rinse it immediately under running water or wash it in a washing machine on a gentle programme.
- Dry the cloth completely before the next use to prevent mould and unpleasant odours.
Maintenance and durability
For the best results, it is recommended to wash the mop cloths regularly and not let dirt dry deep between the fibres. When machine washing, use a low temperature and avoid chlorine, bleach and fabric softeners, which can damage the microfibre and reduce absorbency. Cloths should be replaced with new ones when they are visibly worn, have lost their shape, or cleaning results have noticeably deteriorated.
Value for money
A set of three washable mop cloths is a cost-effective solution, as the same cloth can be used and washed repeatedly. As an original accessory, the D-CC03-0029 is designed specifically for these Ecovacs models, which reduces compatibility risks and helps maintain the robot’s ease of use and reliability. This makes the product a practical, long-term solution for any user of a DEEBOT X1 Plus, T10, T10 Plus or N20 robot.



Reviews
There are no reviews yet.