Description
Robot vacuum with a roller mop and all-in-one station for wet and dry cleaning
The roller mop robot vacuum ECOVACS DEEBOT X11 PRO OMNI vacuums the floor and mops it in the same pass. You can choose between four modes: vacuum, vacuum and mop, vacuum first then mop, or mop only. For long and pet hair the brushes have the ZeroTangle 3.0 anti-tangle design, and the side brush and mop extend into corners and along edges.
LiDAR navigation maps the home from laser-measured distances
LiDAR navigation is a mapping method in which a laser sensor measures the distance to walls and furniture from the return time of a light pulse, and the robot builds a map of the home from these measurements. The navigation module of the DEEBOT X11 PRO OMNI measures distances up to 10 m. Shoes, socks and cables are recognised by the AIVI 3D camera, which needs a well-lit room for this.
All-in-one station and mop washing
The station empties the robot’s 0.22 l dust bin into a 2.5 l dust bag. It washes the roller mop with 75 °C water and then dries it with warm air for 2, 3 or 4 hours. The station refills the robot’s water tank from its 4 l clean water tank, and dirty water collects in the 2.2 l dirty water tank. The station has two boxes for ECOVACS DEEBOT cleaning solution: standard solution goes into the blue box and heavy-duty solution into the black one.
Battery and charging
The lithium-ion battery has a capacity of 6400 mAh and a runtime of up to 206 minutes per charge. According to the manufacturer, the robot can clean up to 1000 m² per task. On returning to the station the robot fast-charges with PowerBoost charging for about 5 minutes and then switches to standard charging.
Use
Place the station against a wall on a flat, hard surface with at least 0.05 m of free space on each side and 0.8 m in front. The robot connects to the ECOVACS HOME app via Bluetooth or a 2.4 GHz Wi-Fi network, and the app lets you set virtual boundaries. On carpets with fibres up to 10 mm the robot lifts the mop; fold up rugs with longer fibres during cleaning or mark them as no-go zones.
Care
Wipe the camera lens with a clean, soft cloth without cleaning agents. If the robot does not charge, wipe the charging contacts with a clean, dry cloth. Fill the clean water tank with water only and put cleaning solution in the solution boxes.
In the box
- Robot vacuum DEEBOT X11 PRO OMNI
- All-in-one station
- Roller mop
- Power cord
- Instruction manual












Reviews
There are no reviews yet.