Description
CPU air cooler with a display showing processor temperature
The DeepCool AK700 DIGITAL WH is a CPU air cooler whose quad-segment digital display on top shows processor temperature, load, power and clock frequency. Seven 6 mm copper heat pipes carry heat from the copper base into the fin tower, which is cooled by a 120 mm fan. The top cover around the display has a wood grain finish.
Fan control with software modes
The display and fan are controlled with DeepCool software, which needs a free USB 2.0 header on the motherboard. The software algorithm tracks processor load in real time and selects the fan speed curve to match. You can choose between Silence AI, Performance AI, Sleep, Office, Gaming and Overclocking modes. The fan connects to the motherboard with a 4-pin PWM connector, through which the motherboard controls its speed by pulse-width modulation. Below a 5% PWM signal the fan stops, and the maximum speed is 2700 rpm. Fan noise is 21.0–36.0 dB(A).
Dust removal with ACT
If you start ACT within eight seconds of switching on the computer, the cooler begins automatic dust removal.
Installing the CPU cooler on Intel and AMD motherboards
The mounting kit fits Intel sockets LGA1851, LGA1700, LGA1200, LGA1151, LGA1150 and LGA1155 and AMD sockets AM5 and AM4. The cooler is 157 mm tall. On an Intel board, fit the backplate, screw on four standoffs and fix the two Intel bars with the nuts. Hole 2 of the bar is for LGA1851 and LGA1700, hole 1 for LGA1200 and LGA115X. On an AMD board, first remove the board’s retention brackets, screw on the AMD standoffs and fix the AMD bars with the nuts. Then apply thermal paste to the processor, peel the protective film off the cooler base, lift off the top cover and fasten the cooler with the supplied tool. Finally refit the cover and attach the fan to the fin tower with the two clips.
In the box
- fin tower with display
- 120 mm fan
- Intel backplate
- mounting bars for Intel and AMD sockets, 2 of each
- standoffs and mounting nuts
- thermal paste in a syringe
- fan clips, 2 pcs
- installation tool






Reviews
There are no reviews yet.