Description
CPU air cooler with a vapour chamber for powerful processors
The DeepCool ASSASSIN VC ELITE WH is a dual-tower CPU air cooler with a TDP rating of 300 W: according to the manufacturer, it can remove that much processor heat output. The vapour chamber in the base is essentially a wide, flat heat pipe in which heat from the processor spreads evenly and moves through seven 6 mm heat pipes into two white-coated fin towers.
Two fans and a mode switch
A 140 mm main fan sits between the towers and a 120 mm fan on the rear tower, both with fluid dynamic bearings (FDB, the shaft runs on a film of oil) and 4-pin PWM connectors through which the motherboard sets the speed. A switch on the cooler selects performance mode, with the fans at up to 1800 and 1700 rpm and overall noise up to 29.3 dB(A), or quiet mode, at up to 1450 and 1350 rpm and overall noise up to 22.6 dB(A). The lower part of the centre fan’s airflow also cools the power delivery components (VRM) around the processor.
Room for tall memory modules
The rear fan frame snaps on and can be set at two heights. On LGA1851, LGA1700, LGA1200, LGA115x, AM5 and AM4 boards the cooler leaves the memory slots clear; on LGA2066 and LGA2011 boards memory modules up to 63 mm tall fit underneath. The top cover over the fans is held by magnets.
Compatibility
The mounting hardware fits Intel LGA2066, LGA2011-v3, LGA2011, LGA1851, LGA1700, LGA1200, LGA1150, LGA1151 and LGA1155 and AMD AM5 and AM4 sockets. The cooler measures 144 × 147 × 164 mm (length × width × height) and weighs 1772 g.
In the box
- CPU air cooler with two fans
- bracket for a third fan
- Intel backplate and mounting brackets for Intel and AMD sockets
- DeepCool DM9 thermal paste, paste spreader and cleaning wipe
- L-shaped screwdriver
- screws, standoffs and nuts










Reviews
There are no reviews yet.