Description
Clean air in a small or medium-sized kitchen without a visible hood
Elica Lane B IX/A/52 is a fully furniture-integrated cooker hood that stays hidden behind the cabinet door and keeps the overall look of the kitchen uniform. A width of about 52 cm, a stainless steel silver finish and a duct-out solution (duct out) suit small and medium-sized kitchens well, where both saving space and effective removal of cooking odours are important. Perimeter extraction and an airflow of up to 395 m³/h together with LED lighting help keep a comfortable and well-lit work area in the kitchen.
Main features
- Integrated 52 cm cooker hood – designed to be installed in a kitchen cabinet, fitting a standard 60 cm wall cabinet and leaving only a discreet front edge visible in the kitchen.
- Perimeter extraction – air is drawn in along the edges of the front panel, which helps to direct steam and odours effectively downwards and makes the overall look of the hood visually cleaner.
- Extraction power 285–395 m³/h – the lower mode suits quieter everyday use, while the higher power helps remove steam and frying odours faster during more intensive cooking.
- LED lighting – energy-saving LED lights illuminate the hob evenly, improving visibility and reducing the need for additional lighting.
- Stainless steel silver finish – a neutral and durable surface that fits easily with different kitchen styles and is simple to wipe clean with a damp cloth.
- Electronic control – a clear control panel lets you select the speeds and lighting conveniently with buttons, without complicated menus or extra devices.
- 150 mm duct connection – allows the air from the kitchen to be directed straight into a ventilation shaft or outdoors, which helps lead moisture and odours out of the room.
- Butterfly valve on the outlet – helps reduce the backflow of cold air or odours from the ventilation duct when the cooker hood is not running.
Compatibility with the kitchen and everyday use
Elica Lane B IX/A/52 is designed to be built into a kitchen cabinet, so it suits those who prefer a uniform furniture front without a visible hood. The width of the cooker hood is approximately 51.4 cm, the depth about 28.3 cm and the maximum height 322 mm, which usually fits a standard 60 cm wall cabinet. Before installation, it is worth measuring the inside dimensions of the cabinet and the planned location of the ventilation pipe, to ensure enough space for the 150 mm duct.
An extraction power in the range of 285–395 m³/h is suitable for small and medium-sized kitchens where everyday meals are prepared. For very large or open-plan kitchens it may be sensible to consider a higher-power model. The noise level in normal use is about 55–61 dB, which is typical for built-in cooker hoods of this class.
The cooker hood is easy to use thanks to the electronic control and the LED lighting, which ensures good visibility on the hob. Regular maintenance mainly means cleaning the body and the control panel, and periodically cleaning or replacing the grease filter according to the recommendations in the user manual. This keeps the appliance efficient and reduces the build-up of grease in the ventilation duct.
For long-term use, energy consumption is also important: the model’s energy class is D, with an annual energy consumption of about 71 kWh. The lighting efficiency class is A, the fluid dynamic efficiency class is E and the grease filtering class is D. This gives a balance between effective air cleaning and moderate energy cost.
Installation and use
Correct installation ensures efficient and safe operation of the cooker hood. Installation should follow the manufacturer’s user and installation manual and, if necessary, a qualified specialist should be involved, especially for the electrical connection.
- Measure the kitchen cabinet – make sure the inside dimensions of the cabinet allow a cooker hood about 51.4 cm wide and 28.3 cm deep to be installed, and that the height is consistent with the maximum height of the appliance.
- Plan the ventilation – plan the route of the 150 mm diameter duct to the ventilation shaft or an exterior wall, as straight and short as possible if you can, to reduce air loss.
- Fix the cooker hood in the cabinet – install the body onto the cabinet structure as instructed, so that the appliance is firmly fixed and does not cause vibration during operation.
- Make the electrical connection – connect the appliance to the mains according to the manufacturer’s instructions, following all electrical safety requirements; if necessary, use the help of a professional.
- Use as needed – choose a lower speed for everyday cooking and a higher mode during more intensive frying or boiling; the LED lighting can also be used as independent worktop lighting.
- Maintain regularly – clean the body and visible surfaces with a soft damp cloth and remove the grease filter for cleaning as instructed, to maintain the extraction capacity of the cooker hood.
When to choose the Elica Lane B IX/A/52 cooker hood?
Elica Lane B IX/A/52 is a good choice if you want a cooker hood that does not dominate the overall look of the kitchen but is hidden inside the furniture, while still offering enough power for everyday use. The integrated design, perimeter extraction and LED lighting help keep the kitchen air cleaner and the worktop well lit, while the duct-out solution and the 150 mm connection suit most home ventilation solutions. If you value a modest appearance, practical functions and solid reliability from a well-known manufacturer, this model meets those expectations well.


Reviews
There are no reviews yet.