Description
Built-in cooker hood for cleaner air and a discreet look in an open kitchen
FABER IN-LIGHT BK MATT KL A52/2 is a built-in cooker hood for a 60 cm wide cooker, which is hidden inside the kitchen cabinetry and helps to effectively reduce cooking odours and moisture even in an open kitchen. The A energy class, perimeter extraction and LED lighting provide a balance between energy saving, performance and convenience, while preserving a minimalist kitchen design with a black stainless steel finish.
Main features
- Built-in solution for a 60 cm cooker – suitable for installation in a kitchen cabinet, leaving the row of cabinets visually uniform and freeing up space instead of low canopies.
- High air capacity – airflow in the range of about 260 to 560 m³/h and a Boost mode of up to 710 m³/h help reduce strong cooking odours even in a larger or open kitchen.
- Duct out solution with a 150 mm connection – the air is led out through a ventilation duct, which ensures effective removal of moisture and heat, if the kitchen has a suitable exhaust connection.
- Perimeter extraction – air is drawn in around the edge, which helps to collect odours and steam better and directs them efficiently into the ventilation.
- LED lighting – energy-saving LED in light class A ensures good visibility when cooking and reduces electricity consumption compared with traditional lighting.
- Electronic control and remote control – the appliance can be controlled both from the panel and with the included remote, which makes it convenient to use even when the cooker hood is installed higher up.
- Wireless connection with the hob – allows the cooker hood to be controlled automatically with a suitable hob, but works only with FABER hobs.
- A energy class – annual energy consumption of about 60 kWh helps to keep running costs under control while maintaining strong extraction power.
Compatibility and accessories
The cooker hood is designed for installation inside kitchen cabinetry and is suitable above all for 60 cm wide hobs. For air extraction, a 150 mm ventilation duct and a corresponding connection point are needed. The appliance does not use a WiFi connection and there are no automatic odour or steam sensors, so the user selects the operating modes themselves as needed.
Wireless integration with the hob is supported, but it works only with hobs of the FABER brand. With hobs from other manufacturers, the cooker hood can be used in the usual way, controlling it either from the control panel or with the remote control.
If you wish to use recirculation mode, activated carbon filters are available separately (not included). Suitable accessories are the F8 KIT activated carbon filter with code 112.0157.240, the higher-performance High Performance FHP8 KIT with code 112.0158.127 and the longer-lasting Long Lasting FLL8 KIT with code 112.0185.278. With these, the air can be cleaned and directed back into the room in cases where an exhaust to the ventilation cannot be built.
Installation and use
The cooker hood is installed in a kitchen cabinet so that only the lower air intake surface remains visible. Before installation, the cabinet opening should be measured and the height checked, which is approximately 331 to 341 mm. The exhaust duct requires a connection with a diameter of 150 mm, which must be connected to the existing ventilation duct according to the manufacturer’s installation instructions.
Use is simple. The power level is selected with the electronic buttons or with the included remote. The standard modes cover everyday cooking, and for more intense odours the Boost mode can be used, where the noise level reaches up to about 69 dB. The LED light can be switched on separately to better illuminate the work surface. As the appliance has no automatic sensors, the user decides when and how strongly to use the cooker hood.
Included in the set
- FABER IN-LIGHT BK MATT KL A52/2 built-in cooker hood
- REMOTE CONTROL 7T PREMIUM BLACK remote control (code 112.0676.782)
When to choose the FABER IN-LIGHT BK MATT KL A52/2?
This cooker hood is well suited to those who want a discreet built-in solution that does not disrupt the uniform line of the kitchen cabinets, yet offers strong air capacity and energy saving at the level of the A energy class. Perimeter extraction, LED lighting and the convenient remote control make the appliance easy to use every day. If the kitchen already has a 150 mm exhaust connection or you plan to use separately purchased activated carbon filters, the FABER IN-LIGHT BK MATT KL A52/2 is a practical choice that helps to keep the kitchen air cleaner in both smaller and open kitchens.


Reviews
There are no reviews yet.