Description
The built-in cooker hood FABER INKA PLUS HCS X A52/2 reduces cooking odours and steam
The stainless steel built-in cooker hood is designed to be installed in a kitchen cabinet directly above the hob, to remove the steam and odours produced during cooking. The FABER INKA PLUS HCS X A52/2 model suits small and medium-sized kitchens well, where a discreet appearance and effective air exchange are wanted. A maximum airflow of up to 590 m³/h helps keep the kitchen air cleaner, and the LED lighting ensures good visibility on the hob.
Main features
- Fully built-in design – the cooker hood is installed in a kitchen cabinet, so the overall look stays uniform and the front panel of the appliance blends in with the rest of the furniture.
- Effective air exchange up to 590 m³/h – suitable for small and medium-sized kitchens, helping to reduce steam, odours and light smoke during everyday cooking.
- Mechanical PIPO control buttons – push-in and push-out buttons make use clear and simple and let you select a suitable extraction speed.
- LED lighting – an energy-saving light source that lights the whole hob surface evenly and makes cooking more comfortable.
- Energy class B – an annual energy consumption of about 56 kWh helps keep costs under control while remaining reliable, and the lighting efficiency class A ensures good light.
- Noise level 47–63 dB – the balance between extraction power and noise level creates a more comfortable environment in the kitchen even at higher operating modes.
- 150 mm air duct – allows the appliance to be connected directly to the exhaust shaft, which supports better extraction and lower noise compared with a pipe of smaller diameter.
- Option of recirculation with a carbon filter – also suitable for use when there is no exhaust shaft, by adding a separately sold carbon filter kit.
How to fit and maintain the FABER INKA PLUS HCS X A52/2 cooker hood
This model is designed to be installed in a kitchen cabinet above the hob and is rated for a 60 cm wide hob. Before buying, it is important to check the interior dimensions of the cabinet and the installation drawing, and to make sure that the body of the cooker hood and the air duct connection fit into the existing cabinet. A 150 mm air duct is used for the exhaust connection, which helps ensure better airflow and a lower noise level. If necessary, a reducer to a smaller pipe can be used, following the manufacturer’s recommendations.
If direct exhaust is not possible in the kitchen, the appliance can be used in recirculation mode by adding a suitable carbon filter. Several original Faber filters have been made for this, such as F8 (product code 112.0157.240), High Performance FHP8 KIT (product code 112.0158.127) and Long Lasting FLL8 KIT (product code 112.0185.278). These filters help bind odour molecules and return the cleaned air to the kitchen, which is especially practical in flats and houses where ventilation options are limited.
Regular maintenance is important in everyday use. The removable grease filters should be cleaned from time to time to keep the airflow even and to reduce the build-up of grease inside the appliance. If a carbon filter is used, it must be replaced or renewed according to the manufacturer’s instructions. Such regular maintenance improves the reliability of the cooker hood and helps preserve the performance of the appliance over a longer period.
Installation and use
During installation, the manufacturer’s instructions and the kitchen’s ventilation solution must be followed. The cooker hood is fixed into a kitchen cabinet or a special housing, then the exhaust opening is connected to an existing ventilation pipe, or the recirculation operating mode is set up with a suitable carbon filter. After installation, the grease filters are put in place and it is checked that all buttons and the lighting work. Use is simple – press the button for the desired operating mode, switch on the LED lighting and select a suitable extraction speed according to the intensity of cooking.
When to choose the FABER INKA PLUS HCS X A52/2
If you are looking for a kitchen solution that combines a discreet built-in design, effective air exchange and simple use, this model is one of the practical choices. The stainless steel finish suits different kitchen styles well and is easy to clean, and the LED lighting together with mechanical control make everyday use clear and comfortable. Thanks to the option of working with either direct exhaust or recirculation mode, this cooker hood suits many kitchens where it is important to keep the air fresh and reduce the spread of cooking odours.


Reviews
There are no reviews yet.