Description
Clean kitchen air, unnoticed – Elica LANE IX/A/72 built-in cooker hood
The Elica LANE IX/A/72 is a 72 cm wide built-in cooker hood that is installed in a kitchen cabinet so that only the lower edge remains visible. The stainless steel body, perimeter extraction and extraction power of up to 650 m³/h help to effectively remove steam and odours from small and medium-sized kitchens, keeping the look of the kitchen clean and minimalist.
Main features
- 72 cm fully integrated solution – fits a standard wide kitchen cabinet; only the discreet lower part remains visible, which keeps the worktop visually clean.
- Powerful airflow of 255–650 m³/h – a minimum airflow of 255 m³/h for everyday cooking and up to 650 m³/h for intensive use to remove vapours from small and medium-sized kitchens.
- Perimeter extraction – air is drawn in through narrower slots, which helps improve extraction efficiency and keeps grease on the filter surfaces.
- Energy class B – annual energy consumption of about 69 kWh and LED lighting offer a balance between good extraction power and moderate energy use.
- Lowest noise level 49 dB – noise stays between 49 and 68 dB depending on the operating mode, allowing you to choose the speed that suits the situation.
- Electronic control – clear buttons and multi-step speed selection (incl. intensive mode) make use convenient.
- Washable metal grease filters – reusable filters reduce running costs and are easy to maintain.
- 150 mm exhaust outlet – fits common ventilation ducts; the built-in non-return valve helps prevent cold air and odours from flowing back.
Compatibility with the kitchen and your needs
The Elica LANE IX/A/72 is designed to be installed in a kitchen cabinet or in a housing built into a cabinet, with a width of approximately 72 cm. The width of the hood is about 71.4 cm and the depth about 28.3 cm, with a maximum height of up to 322 mm, so it fits most upper cabinets of standard dimensions with sufficient installation space.
With an airflow of up to 650 m³/h, the hood is typically suitable for small and medium-sized kitchens where hot meals are cooked daily. Perimeter extraction helps reduce the spread of vapours and odours, so the air stays cleaner more evenly even in open-plan kitchens.
The stainless steel finish and silver tone blend easily with different kitchen furniture colours. Thanks to the integrated design, the appliance stays out of sight most of the time, while still providing the necessary LED lighting above the hob.
Installation and use
The hood is connected to the building’s ventilation system through a duct with a diameter of 150 mm, in accordance with the manufacturer’s instructions. Before installation, check the internal dimensions of the cabinet and make sure that the height and depth allow the appliance to be placed together with the exhaust duct. During installation, it is important to follow the recommended minimum distance from the hob, as specified in the user manual.
When using it, it is recommended to switch the hood on at a lower speed a few minutes before you start cooking and to leave it running for a few minutes after finishing. This way the built-in cooker hood can remove steam and odours more effectively and keeps kitchen surfaces drier.
The LED lighting gives an even and energy-saving light above the hob, which improves visibility when cooking and reduces the need for additional lights in the worktop area.
Maintenance and cleaning
The metal grease filters should be removed and cleaned regularly to maintain the efficiency of the hood and reduce the build-up of odours. The filters can be washed by hand with warm water and washing-up liquid or, if the manufacturer’s instructions allow it, in the dishwasher on a gentle programme.
It is recommended to clean the body and visible surfaces with a soft damp cloth and a suitable stainless steel cleaner, avoiding abrasive substances that may scratch the surface. Regular maintenance extends the life of the appliance and keeps both the lighting and the extraction power consistent.
Included in the set
- Elica LANE IX/A/72 built-in cooker hood with a stainless steel body
- Metal grease filters (factory-fitted)
- Built-in non-return valve in the exhaust outlet
- Fixings for installation in a kitchen cabinet
- User and installation manual
When to choose the Elica LANE IX/A/72?
The Elica LANE IX/A/72 is a good choice if you are looking for a discreet built-in solution that hides in a kitchen cabinet but at the same time offers strong extraction power, perimeter extraction and energy-saving LED lighting. The stainless steel finish, electronic control and washable grease filters make it a balanced solution for a modern kitchen where both clean air and a clean look are valued.


Reviews
There are no reviews yet.