Description
Built-in cooker hood Elica ENTER WH/A/52 for cleaner air in the kitchen
Elica ENTER WH/A/52 is a white cooker hood, fully integrated into the kitchen furniture, that helps to reduce the fumes and odours produced during cooking. Thanks to perimeter extraction and an airflow in the range of 255–650 m³/h, this model is suitable for everyday use in small and medium-sized kitchens, where it is important to keep the hob area visually clean and to make the appliance as unnoticeable as possible.
Main features
- Built-in installation – the cooker hood is designed to be installed in a kitchen cabinet above the hob, which helps to maintain a uniform and understated kitchen design.
- Airflow 255–650 m³/h – the minimum, maximum and boost airflow levels make it possible to adjust the operating mode to the intensity of cooking.
- Perimeter extraction – air is directed to the edge areas of the intake openings, which can help to improve the capture of steam and odours compared with a classic central suction area.
- Duct out extraction version – the appliance is intended to be connected to a ventilation duct, to lead polluted air out of the kitchen instead of recirculating it in the room.
- LED lighting – built-in LEDs provide even and energy-saving lighting on the hob surface.
- Electronic control – control is by electronic buttons, which makes changing the speed and the lighting simple and precise.
- Energy efficiency class B – a balanced solution that offers good extraction power with moderate energy consumption.
- Noise level 49–68 dB – the minimum noise level is suitable for quiet everyday use, and the intensive mode provides more power when needed.
Compatibility with kitchen ventilation and the room
Elica ENTER WH/A/52 is a built-in cooker hood designed to be installed inside kitchen furniture in a standard arrangement. The standard width is 55 cm, so it fits under most upper cabinets and above most hob widths designed for the same size. Thanks to its compactness and built-in construction, only the lower part remains visible, which blends well with modern kitchen furniture.
The cooker hood is factory-set to the extraction version, which means it is intended to be connected to a ventilation duct. The duct size is 150 mm, so it is important to check the size of the existing ventilation opening and ductwork before buying. The appliance has no Wi-Fi, autonomous sensors or wireless connection to the hob, which makes it simple and straightforward to use and reduces the complexity that comes from additional functions.
Installation and use
The cooker hood is installed in a kitchen cabinet according to the manufacturer’s instructions, ensuring secure fixing and correct alignment with the hob. For the electrical connection and the connection of the ventilation duct, it is recommended to involve a qualified specialist, to ensure a safe installation that meets the requirements. Before installation, the internal dimensions of the cabinet should be measured and it should be confirmed that the ventilation duct has a suitable diameter and location.
In everyday use, it is recommended to switch the cooker hood on a few minutes before cooking, so that the airflow stabilises and steam collection starts early. After cooking has finished, the appliance can be left on for a short time to remove residual steam and odours. The speed is worth choosing according to the situation: a lower level is suitable for lighter cooking, and higher power for more intensive frying and grilling.
In terms of maintenance, it is important to monitor the performance of the grease filter and the need for cleaning. Grease filtering efficiency class D indicates that the filters need regular maintenance to retain their effectiveness. The outer surfaces can be cleaned with a soft cloth and a mild cleaning agent, avoiding abrasive substances that may damage the painted steel surface.
Why choose Elica ENTER WH/A/52?
If you are looking for a solution that can be hidden in kitchen furniture and combines perimeter extraction, LED lighting and energy class B, Elica ENTER WH/A/52 is a practical choice. The built-in construction, the 255–650 m³/h airflow and the duct out extraction version suit both planning a new kitchen and integrating with an existing ventilation system. Simple electronic control and a neutral white finish make this model a functional and understated solution for different kitchens.




Reviews
There are no reviews yet.