Description
Cleaner kitchen air with the discreetly built-in Elica Lane MBL/A/52 cooker hood
Elica Lane MBL/A/52 is an in-cabinet built-in cooker hood that sits flush with the kitchen units and helps keep the kitchen looking uniform and calm. Efficient perimeter extraction collects steam and odours along the edges of the panel and directs them straight into the extraction duct, while the LED lighting ensures good visibility over the hob.
Main features
- Built-in installation – the cooker hood is designed to be built into a kitchen cabinet, so only a narrow front edge remains visible and the line of the kitchen units stays even.
- Effective air exchange of 255–650 m³/h – the airflow range lets you choose a suitable speed for everyday cooking and for more intensive cooking.
- Perimeter extraction – air is drawn into intake openings around the edges of the panel, which helps collect steam and odours from around the hob more effectively.
- LED lighting – an energy-saving LED light (lighting efficiency class A) gives even, clear light to the cooking area.
- Energy class B – annual energy consumption of about 69 kWh helps keep energy costs under control with continuous use.
- Quieter operation at lower speeds – the noise level starts at about 49 dB, which suits everyday use well as background noise.
- Booster mode up to 650 m³/h – for short periods of intensive use, when there is a lot of steam or strong odours at once.
- Extraction mode with a 150 mm duct – connection to a standard 150 mm ventilation duct ensures effective extraction and suits typical kitchen ventilation solutions.
Compatibility and suitability for the kitchen
This built-in cooker hood is designed to be installed in a kitchen cabinet whose internal dimensions match the dimensions of the appliance. The width is approximately 52 cm (installation opening width about 51.4 cm) and the depth is about 28.3 cm, so it usually suits hobs that are 50–60 cm wide. Before installation, the existing cabinet should be measured and the measurements compared with the manufacturer’s installation drawing.
The cooker hood has a 150 mm air duct connection, which suits common round ventilation ducts. In extraction mode, air is directed outside through the building’s ventilation system or a separately built extraction duct. If necessary, it is worth consulting an installer or a ventilation specialist to choose a solution suitable for the particular kitchen.
Maintenance and everyday use
The cooker hood is controlled with electronic buttons, which let you choose between different speeds and the booster mode. It is recommended to switch the cooker hood on a few minutes before you start cooking and to leave it running after the food is ready, so that moisture and odours can be fully removed.
The appliance has a grease filter, and cleaning it regularly ensures the reliability of the cooker hood and helps keep the airflow stable. The filter should be cleaned according to how often the hood is used, for example every few weeks to every few months. It is recommended to clean the outer surfaces and the front panel with a soft cloth and a non-abrasive cleaning agent. More detailed cleaning and maintenance instructions can be found in the manufacturer’s user manual.
Installation recommendations
Elica Lane MBL/A/52 is designed to be built into a cabinet, so it is important to follow the dimensions and fixing points shown in the installation drawing. The cooker hood is fixed to the furniture carcass and connected with a 150 mm ventilation duct to the building’s extraction system. During installation, sufficient distance from the hob must be ensured according to the manufacturer’s instructions, so that the appliance can be used safely and efficiently.
It is recommended to have the installation done by a qualified technician who knows the ventilation requirements and the rules for electrical connections. This ensures that the cooker hood works according to the manufacturer’s requirements and that the noise and extraction figures correspond to the designed level.
When to choose the Elica Lane MBL/A/52?
If you are looking for a kitchen solution that combines a discreet built-in design, efficient perimeter extraction and LED lighting, the Elica Lane MBL/A/52 is a practical choice. This model suits especially well those who want to keep the line of the kitchen units clean and even, but at the same time need reliable air exchange in a system with extraction. Well-thought-out features and dimensions make this cooker hood a balanced solution for a modern home kitchen.


Reviews
There are no reviews yet.