Description
Clean air and understated design in an open kitchen with the built-in Elica Lane MBL/A/72 cooker hood
The built-in Elica Lane MBL/A/72 cooker hood is meant for those who want to keep the kitchen air as clean as possible without a visible hood. The 72 cm wide body is suitable for hiding in a kitchen cabinet, and strong extraction with perimeter extraction helps to quickly remove steam and cooking odours. The black painted steel and the LED lighting create an understated and even look that suits both modern and more classic kitchen furniture.
Main features
- The built-in 72 cm cooker hood for installation in a kitchen cabinet leaves a clear view above the worktop and an even furniture line.
- Air flow of up to 650 m3/h allows effective extraction both during everyday cooking and during intensive frying.
- Perimeter extraction directs the air intake to the edges, which helps to collect steam and odours better from the whole cooking area.
- LED lighting provides even and energy-efficient light for the cooking area while reducing electricity consumption.
- Electronic control allows you to choose several operating speeds and to use the intensive mode according to current needs.
- Black painted steel is visually understated and suits many kitchen furniture shades.
- The 150 mm duct connection ensures better air flow and helps to keep the noise level lower compared with ducts of a smaller diameter.
- Energy class B and an annual energy consumption of approx. 69 kWh give a balance between performance and energy use.
Suitability and uses
The Elica Lane MBL/A/72 cooker hood is designed as a fully built-in solution for installation in a wall cabinet or a decorative box. The standard width of 72 cm and the body dimensions of approximately 71.4 cm wide and 28.3 cm deep usually fit a cabinet at least 80 cm wide. Before buying, it is worth measuring the existing furniture opening and the planned duct connection to make sure it fits.
The maximum air flow of up to 650 m3/h makes it a good choice for a medium to large kitchen with an area of approximately 12 to 24 square metres. Such power also suits open kitchen-living room solutions, where cooking odours would otherwise spread quickly to other rooms. At lower speeds the noise level is in the range of about 49 to 65 dB, and in the intensive mode up to 68 dB, which means that in everyday use you can often manage with a quieter setting.
The cooker hood works in extraction mode and is intended for connection to a ventilation duct opening to the outside air with a diameter of 150 mm. This helps to keep both the extraction power and the noise level at an optimal level. If the installer’s and the manufacturer’s solution also provides for recirculation mode with a carbon filter, bear in mind that the corresponding filters may be separate accessories.
Installation and everyday use
Correct installation of the cooker hood is important so that the appliance works quietly and efficiently. The appliance is fixed in a kitchen cabinet or a structural box following the manufacturer’s dimension and height requirements, and it is connected to the 150 mm ventilation duct of the building’s ventilation or to a separate exhaust opening. It is worth avoiding excessive sharp bends in the ducting, as they can increase noise and reduce air flow.
For everyday use, it is recommended to switch the cooker hood on a few minutes before cooking and to leave it running for a while after the hob is switched off. A low speed is suitable for ordinary boiling and stewing; with more steam you can choose a higher level or the intensive mode. The integrated LED lighting ensures good visibility in the cooking area without separate worktop lighting.
The cooker hood is equipped with electronic control, which makes changing speeds and using the lighting easy. As there is no Wi-Fi, control is done directly from the panel, which is a practical and clear solution without additional apps.
Maintenance and cleaning
The aim of maintenance is to keep the efficiency and noise level of the cooker hood stable. Metal grease filters should be cleaned regularly depending on how often it is used, usually about once a month. They are as a rule removable and can be washed by hand with warm water and washing-up liquid or, if necessary, in a dishwasher at a low temperature.
It is recommended to clean the front panel of the perimeter extraction and the body with a soft damp cloth using a gentle non-abrasive cleaning agent. To protect the surface of the black painted steel, do not use scratching sponges or strong chemical cleaners. Before cleaning, the appliance must always be disconnected from the mains.
If the installation solution uses activated carbon filters in addition to the grease filter, they must be replaced periodically according to the manufacturer’s instructions. Carbon filters are usually not part of the standard equipment and must be purchased separately if needed.
When to choose the Elica Lane MBL/A/72
The built-in Elica Lane MBL/A/72 cooker hood is a good fit if you prefer a hood with an invisible solution that blends in with the kitchen furniture but still offers strong extraction. Perimeter extraction, a strong air flow of up to 650 m3/h and energy-efficient LED lighting create a balance between performance, convenience and energy consumption. If you value clean air in an open or larger-than-average kitchen and want to keep the space above the worktop free, this model is a practical choice that is easy to use and maintain.


Reviews
There are no reviews yet.