Description
Sink cabinet waste separation system with a large bucket for a cabinet drawer
The sink cabinet waste separation system BLANCO FLEXON II Low XL 60/3 is installed inside the drawer of a base cabinet, so the buckets slide out with the drawer. Seen from above, the large bucket sits on one side and the two small ones one behind the other on the other side, so three waste types can be sorted separately. One small bucket has a lid.
The buckets hang from a frame that keeps the system stable. The system is made of plastic and aluminium.
Installation in the sink cabinet
The sorter goes into a base cabinet with a pull-out drawer. Inside the drawer it needs an installation height of 325 mm above the drawer bottom and an installation depth of 400 mm. The top of the frame sits at most 250 mm above the drawer bottom.
BLANCO’s drawing gives an inner cabinet width of 562 or 568 mm. Cabinets with frame and panel doors with frames from 90 mm are also suitable.
The frame is fitted without marking or pre-drilling. According to the installation guide, the frame and bracket click together and the frame is set on the drawer front 324 mm above the drawer bottom with an equal gap on both sides. It is then fixed with 4 screws to the front and 2 screws to the drawer bottom, and the buckets are hung in the frame.
Plan the minimum cabinet size together with the installation height of the sorter, the height of the drawer bottom and the installation depth of the sink with its waste kit.
Cleaning
The large smooth surfaces of the frame and buckets are easy to wipe clean. For daily cleaning, use a microfibre cloth moistened with water.
In the box
- Sink cabinet waste separation system BLANCO FLEXON II Low XL 60/3, 1 pc
- Frame with bracket for drawer installation
- 30 l bucket, 1 pc
- 8 l bucket, 2 pcs
- Lid for 8 l bucket, 1 pc
- Fixing screws TX20, 4 × 20 mm, 6 pcs





Reviews
There are no reviews yet.