Description
Sink cabinet waste separation system BLANCO SELECT II BIG with a large bucket
The sink cabinet waste separation system BLANCO SELECT II BIG 60/2 is fitted on runners in the lower part of the sink cabinet, and its frame fixes to the cabinet front. The large bucket sits on one side and the small one on the other. A system cover closes the buckets from above.
Bag clips on the large bucket hold the bin bag in place, and one or two bags can be fixed under its top frame. The soft-close runners pull the drawer shut. The system is made of plastic and aluminium.
Installation in the sink cabinet
The installation height is 420 mm and the installation depth 400 mm. The runners need an inner cabinet dimension of 450 mm and side walls 16 or 19 mm thick. For 18 mm side walls, spacer plates are ordered separately. The system also fits frame and panel doors with a frame of at least 40 mm.
The runners and mounting plates are fixed to the cabinet side walls with five screws each. The frame is screwed to the cabinet front with four screws and clicked onto the runners. The cabinet front must be at least 16 mm thick.
After installation you can adjust the front’s position with a TX 20 screwdriver. Plan the installation height, the sink’s installation depth and the resulting minimum inner cabinet size together.
In the box
- Sink cabinet waste separation system BLANCO SELECT II BIG 60/2, 1 pc
- Pull-out system for fixing to the cabinet front
- System cover
- 35 l bucket with bag holder and bucket frame, 1 pc
- 15 l bucket, 1 pc



Reviews
There are no reviews yet.