Description
Sink cabinet waste separation system BLANCO FLEXON II for a drawer
The sink cabinet waste separation system BLANCO FLEXON II 60/3 is a frame in which the buckets hang. The frame fixes to the drawer front and bottom, and the three identical buckets sit side by side in it.
Above the buckets is a pull-out system cover that can be used as a storage surface. The cover runs on its own runners fixed to the cabinet side walls. The system is made of plastic and sheet steel.
Installation in the sink cabinet
The installation height is 355 mm above the drawer bottom, or 325 mm without the system cover. The installation depth is 400 mm, measured inside the drawer. The drawer sides may be up to 250 mm high. The system also fits frame and panel doors with a frame of at least 90 mm.
To install, the U-shaped support clicks onto the frame, and the frame is centred in the drawer with its top edge 340 mm above the drawer bottom. The frame is screwed to the drawer front with four screws and the support to the drawer bottom with two.
The cover runners are fixed to the cabinet side walls at least 5 mm above the top of the frame. Then the buckets go into the frame and the cover onto the runners. Plan the installation height, the drawer bottom height and the installation depth of the sink and its waste kit together, as they set the minimum cabinet size.
In the box
- Sink cabinet waste separation system BLANCO FLEXON II 60/3, 1 pc
- Frame and U-shaped support for drawer installation
- System cover with two runners
- 15 l bucket, 3 pcs
- Fixing screws 4 × 20 mm, 12 pcs





Reviews
There are no reviews yet.