Description
Sink cabinet waste separation system with four buckets for a cabinet drawer
The sink cabinet waste separation system BLANCO FLEXON II 60/4 is installed inside the drawer of a base cabinet, so the buckets slide out with the drawer. Seen from above, the two large buckets sit side by side and the two small ones one behind the other next to them, so four waste types can be sorted separately. One small bucket has a lid.
The buckets hang from a frame that keeps the system stable. The system is made of plastic and sheet steel.
Installation in the sink cabinet
According to BLANCO, the sorter fits a standard sink cabinet with one drawer. With the system cover the installation height is 355 mm, without it 325 mm above the drawer bottom; the installation depth is 400 mm inside the drawer. The top of the frame sits at most 250 mm above the drawer bottom.
BLANCO’s drawing gives an inner cabinet width of 562 or 568 mm. Cabinets with frame and panel doors with frames from 90 mm are also suitable.
The frame is fitted without marking or pre-drilling. According to the installation guide, the frame and its bracket click together, are screwed to the drawer front and bottom, and the buckets are hung in the frame. Plan the minimum cabinet size together with the installation height of the sorter, the height of the drawer bottom and the installation depth of the sink with its waste kit.
Cleaning
The large smooth surfaces of the frame, cover and buckets are easy to wipe clean. For daily cleaning, use a microfibre cloth moistened with water.
In the box
- Sink cabinet waste separation system BLANCO FLEXON II 60/4, 1 pc
- Frame for drawer installation
- Pull-out system cover
- 15 l bucket, 2 pcs
- 6 l bucket, 2 pcs
- Lid for 6 l bucket, 1 pc



Reviews
There are no reviews yet.