Description
Sink cabinet waste separation system BLANCO SELECT II Orga with organiser drawer
The sink cabinet waste separation system BLANCO SELECT II 60/2 Orga is fitted on runners in the lower part of the sink cabinet, and the bucket frame fixes to the cabinet front. The large bucket sits on one side and the smaller one on the other. The organiser drawer runs on its own runners above the buckets.
The drawer’s universal boxes can be moved to leave more room for the sink’s waste fittings. The soft-close runners pull the drawer shut. The system is made of plastic and aluminium.
Installation in the sink cabinet
The installation height is 458 mm and the installation depth 400 mm. The runners need an inner cabinet dimension of 450 mm and side walls 16 or 19 mm thick. For 18 mm side walls, spacer plates are ordered separately. The system also fits frame and panel doors with a frame of at least 40 mm.
The mounting plates and two pairs of runners are screwed to the cabinet side walls, the frame is fixed to the cabinet front with four screws and clicked onto the lower runners. The organiser drawer goes onto the upper runners. The cabinet front must be at least 16 mm thick. The frame fixing points sit 225 and 320 mm above the cabinet floor, 518 mm apart on this model.
After installation you can adjust the front’s height, tilt and side position with a TX 20 screwdriver. The front and frame click off the runners. Plan the installation height, the sink’s installation depth and the resulting minimum inner cabinet size together.
In the box
- Sink cabinet waste separation system BLANCO SELECT II 60/2 Orga, 1 pc
- Pull-out system for fixing to the cabinet front
- Organiser drawer
- 30 l bucket, 1 pc
- 19 l bucket, 1 pc





Reviews
There are no reviews yet.