Description
Wired router with gigabit ports and SFP+ cages
This passively cooled Ethernet router with 18 wired ports connects the internal network through 16 gigabit ports, while uplink and downlink connections run through two 10G SFP+ cages. The front panel also has an RJ45 console port and a reset button. Each group of eight ports is connected to its own Marvell switch chip with a 10 Gbit/s full-duplex line to the processor, and each SFP+ cage also has its own 10 Gbit/s line.
Processor, memory and performance
The quad-core 64-bit Annapurna Labs Alpine v2 (AL32400) ARM processor runs at 1.2 GHz, with 4 GB of DDR4 memory and 128 MB of NAND storage. In the manufacturer’s RFC2544 test, routing throughput reached up to 31,253 Mbit/s with 1518-byte packets and up to 2,602.9 Mbit/s with 256 IPsec tunnels.
Power and cooling
The router has two DC inputs, a DC jack and a 2-pin terminal, both for 36–57 V. Maximum power consumption is 36 W, or 30 W without attachments. Heat is carried away by the heatsink on the rear, as cooling is passive.
Use and software
RouterOS v7 comes preinstalled with a level 6 licence, so the router is ready to use. The manufacturer provides software updates for the life of the product, for at least 5 years from purchase. The router is fitted in a server rack with the supplied rackmount brackets. Sensors monitor the processor and circuit board temperature and the supply voltage.
In the box
- wired router MikroTik CCR2004-16G-2S+PC
- 48 V, 0.95 A power adapter
- rackmount brackets
- fastening set





Reviews
There are no reviews yet.