Description
Cable locator for finding wires, breaks and short circuits
The UNI-T UT25CL cable locator set consists of the UT25CL-T transmitter and the UT25CL-R receiver. The transmitter sends a 33 kHz signal into the wire, which the receiver uses to find the wire.
Wires in walls and fuse boards
The receiver finds wires hidden in walls and breaks and short circuits in them. In a fuse board it shows which fuse protects the circuit you are tracing.

Underground cables, floor heating and pipes
In single-pole mode the tracking depth is up to 2.5 m, in two-pole mode up to 0.5 m. Short circuits and breaks can be located in metal floor heating systems. Metal water and heating pipes can also be traced.



Live wires and non-contact voltage detection
The transmitter also works on live wires at AC/DC 8–480 V. Above 25 V the transmitter’s ELV LED lights up, getting brighter as the voltage rises. The receiver’s non-contact voltage detection (NCV) finds 80–1000 V AC from about 0.4 m away without touching the wire.
Sensitivity, codes and screen
The receiver sensitivity is set automatically or manually in 3 levels. Transmitter and receiver use codes 0–7, so transmitters can be told apart in the same installation. Results are shown on the screen and signalled by a buzzer. The receiver has a flashlight, and the segment LCD screen is backlit.
In the box
- UT25CL-T transmitter
- UT25CL-R receiver
- Test leads
- User manual
- Carry case







Reviews
There are no reviews yet.