Description
Portable oscilloscope with multimeter and signal generator
The touchscreen oscilloscope FNIRSI 2C53P displays the signal on a 4.3-inch IPS screen with a resolution of 480 × 272 pixels. The waveform can be zoomed and panned on the screen. The screen is made of tempered glass and there is a 90° adjustable stand on the back.

Signal analysis and trigger
For signal analysis the oscilloscope offers FFT (fast Fourier transform), XY mode, cursor measurements, maths functions and True RMS measurement. There are 3 trigger modes: auto, normal and single. Auto Set sets up the waveform display with one button press. The bandwidth can be limited to 20 MHz to measure millivolt-level power supply interference.

Built-in multimeter
The multimeter measures DC and AC voltage, current, resistance, capacitance and temperature, and tests diodes and continuity. The maximum reading is 19,999 counts. Up to 5 measurement parameters can be stored, minimum and maximum values tracked and data sent to a computer over USB. 2 ceramic fuses protect the multimeter against current and voltage overload.


Signal generator
The generator produces a sine wave of up to 10 MHz and other waveforms of up to 5 MHz. The signal amplitude can be set from 0.1 to 3.0 V and the square wave duty cycle from 0 to 100%.
Battery, menu and data transfer
Power comes from a 4000 mAh lithium battery, charged through the USB-C port at 5 V / 2 A. Screenshots of the waveform can be saved and files copied to a computer with a USB cable. The menu is available in 8 languages, including English, German and Russian.

In the box
- FNIRSI 2C53P oscilloscope
- Probe with crocodile clip
- P6100 probe, 2 pcs
- Multimeter probe
- Data cable
- User manual




Reviews
There are no reviews yet.