Description
Oscilloscope, multimeter and signal generator in one device
The FNIRSI 2C23T digital oscilloscope is intended for testing electronic circuits and finding faults. The housing is 35 mm thick and the device fits in a tool bag or backpack.

Oscilloscope measuring options
Both channels work independently of each other, with a maximum input voltage of 400 V. The time base can be set from 50 ns to 10 s and the vertical sensitivity from 20 mV/div to 10 V/div. The AUTO button sets up the measurement with one press. Waveform screenshots can be saved and viewed on a computer.

True RMS multimeter
The multimeter measures AC voltage up to 750 V and DC voltage up to 1000 V, as well as current, resistance, capacitance, diodes and continuity. True RMS measurement shows the effective value even of distorted AC waveforms, and the range is selected automatically. The multimeter can tell the live and neutral wires apart and hold a reading on the screen. The current inputs are protected by ceramic fuses.

Signal generator
The generator provides 7 waveforms: sine, square, triangle, full-wave and half-wave, noise and DC. The output frequency is 1 Hz to 2 MHz and the amplitude 0.1–3.3 V. The duty cycle can be set from 0 to 100%.

Use
The device can measure mains voltage, analyse pulse signals and measure the carrier frequency of quartz oscillators. It can also assess the output ripple of power supplies and test audio signals.
Housing, battery and charging
A silicone cover protects the ABS housing against drops and impacts. A stand on the back holds the device upright on a table. The built-in 3000 mAh lithium battery charges through the USB-C port at 5 V / 1 A. Menu languages are English, Russian, Portuguese, Japanese and German.


In the box
- FNIRSI 2C23T oscilloscope multimeter
- 10X probe
- Probe with crocodile clip
- Multimeter probe
- Charging cable
- User manual




Reviews
There are no reviews yet.