Description
Jump starter with supercapacitor for 12 V vehicles
Engine starting in a 12 V vehicle is supported by the ANCEL BS200 jump starter, which delivers up to 700 A peak current and stores energy in a supercapacitor. The supercapacitor has low internal resistance and high power density, so current for starting is available at once even with a weak battery, in frost and with frequent start-stop use. The BS200 works even with a heavily discharged battery, as long as its voltage stays above 5 V.


Automatic and emergency start modes
When connected correctly, the BS200 automatically supports every engine start. Its control algorithm detects cold starts and frequent start-stop cycles and distributes energy storage and release between the starter motor and the car battery. In an emergency you can use forced start from the app or switch on manual mode with the Manual Discharge button.


Charging from the car battery or via USB-C
Once the device is connected to the battery, charging starts automatically without your intervention and takes about 3–22 minutes. If needed, you can also charge the BS200 through its USB-C port from a 5 V / 2 A adapter or a power bank.

Operating data in the Super Starter app
Over Bluetooth BLE 5.3 the Super Starter app shows the device’s voltage, current, temperature and capacity in real time. The app records start history, voltage fluctuations and discharge currents, lets you export the data and notifies you of faults and maintenance.

Operating temperature and protection rating
The BS200 works in both frost and heat: its operating temperature is −40 °C to 80 °C. The IP65 housing rating means the device is dust-tight and protected against water jets from any direction.

In the box
- Jump starter ANCEL BS200 with connecting cables, 1 pc
- Battery clamps, 2 pcs (red and black)





Reviews
There are no reviews yet.