Description
Fuel injector cleaner and tester for six injectors at once
Electromagnetic (EFI, GDI) and piezoelectric injectors are cleaned and tested by the fuel injector cleaner and tester ANCEL ANJ600. You can adjust the fuel pressure between 0 and 8 bar and the unit simulates engine operation up to 9,900 rpm.

The ultrasonic cleaner removes carbon from injectors
The standalone 100 W ultrasonic cleaner works at 38–39 kHz: ultrasonic waves create cavitation in the fluid, which removes carbon and dirt even from complex shapes, recesses and pores of the injector. Injectors can also be cleaned without removing them from the vehicle.

The injector tester checks uniformity, leaks and volume
In the uniformity and spray pattern test you compare injectors with each other and watch the atomisation with backlighting. The leak test checks the needle valve under system pressure and the volume test measures the fuel delivered during a 15-second cycle. The unit measures injector resistance with 0.1 Ω accuracy.

Automatic test simulates different engine modes
The unit has three automatic test modes that check the injectors at idle, medium and high speed, variable acceleration, variable braking and pulse width modulation. You can set the speed from 100 to 9,900 rpm in 10 rpm steps, the pulse width from 0 to 30 ms in 0.1 ms steps and the test time from 5 to 300 s in 5 s steps.

Piezo and low-resistance injectors
A dedicated motherboard lets the ANJ600 run long tests on low-resistance injectors too, including 1 Ω models. Backflushing removes dirt from inside the injector and from its filter.

Microcomputer-controlled fuel pressure and quick drain
A microcomputer holds and regulates the fuel pressure. The Drain button empties the system quickly during selected tests and on a sudden power cut the unit reduces the pressure automatically, which protects the components from damage.

In the box
- Fuel injector cleaner and tester ANCEL ANJ600 with ultrasonic cleaner, 1 pc
- R1/4 plug, 5 pcs
- Adjustment screw, 2 pcs
- Drain valve, 1 pc
- Fuel hose, 1 pc
- Fuel funnel, 1 pc
- Connector gasket 7.52 × 3.53, 10 pcs
- Pulse cable for six injectors, 1 pc
- Dedicated hose, 6 pcs
- Power cable, 1 pc
- User manual, 1 pc
- Pair of standard plates, 1 pc
- Standard connector Ø 10.6, 6 pcs
- European connector Ø 13.6, 6 pcs
- GDI adapter connector Ø 9.8, 6 pcs
- GDI adapter connector Ø 12.5, 6 pcs
- GDI adapter connector M18, 6 pcs
- Mercedes-Benz piezo injector connector Ø 16, 6 pcs
- BMW GDI adapter connector M12 × 1.5, 6 pcs
- BMW piezo injector connector, 6 pcs
- Injector base Ø 11, 6 pcs
- Injector plate Ø 14, 6 pcs
- BMW piezo injector holder, 1 pc







Reviews
There are no reviews yet.