Description
Fuel injector cleaner and tester for motorcycle MPI injectors
The fuel injector cleaner and tester ANCEL JC200 checks 6 V and 12 V motorcycle MPI injectors that are fed from the top (top-feed). A microprocessor simulates different engine operating conditions and the fuel delivered by the injectors collects in two 100 ml measuring cylinders.

The injector tester shows uniformity and spray pattern
The uniformity test compares whether the injectors deliver the same amount of fuel, and the backlit spray pattern view lets you judge atomisation by eye.

Leak test and fuel volume measurement at operating pressure
The leak test shows whether an injector leaks under operating pressure, and the volume test measures how much fuel the injector delivers under set operating conditions.

Adjustable speed, test time and constant operating pressure
You can set the speed between 100 and 9,900 rpm in 100 rpm steps and the test duration from 30 to 600 seconds. Compressed air pushes the test fluid through the system and keeps the operating pressure constant at 1.2–1.5 bar, which improves measurement repeatability. Pressure is released manually and the unit is powered from a 12 V vehicle battery, so it can also be used outside the workshop.

Fluid level indicator and interchangeable connectors
To monitor the amount of test fluid, the unit has a fluid level indicator and used test fluid can be reused. Interchangeable connectors let you fit different types of motorcycle injectors, and the backlight shows the different states of the fuel system.

In the box
- Fuel injector cleaner and tester ANCEL JC200, 1 pc
- Power cable 0.8 m, 1 pc
- Signal cable 0.8 m, 2 pcs
- Injector mounting plate, 1 pc
- M6 screw, 2 pcs
- M6 clamping nut, 2 pcs
- Oil separator, 1 pc
- Test bottle, 2 pcs
- Connector 9–11.3, 2 pcs
- Connector 11–12.8, 2 pcs
- Connector 13–14.5, 2 pcs
- Gasket Ø 10, 2 pcs
- Gasket Ø 14, 2 pcs
- Accessory box, 1 pc
- Blind plug, 1 pc

Reviews
There are no reviews yet.