Description
Anycubic PETG-CF is a carbon fibre reinforced PETG filament for printing functional and decorative parts.

PETG filament print settings
With a 0.4 mm nozzle the nozzle temperature is 240–270 °C and the bed temperature 65–75 °C. Print speed is 40–250 mm/s, maximum volumetric flow 11 mm³/s and fan speed 60%. A hardened steel nozzle of at least 0.4 mm is recommended. Dry damp filament at 60–65 °C for 6–8 hours.
Matte surface and strength
The satin-matte surface hides layer lines. Tensile strength is 54 MPa in X-Y and 37 MPa in Z, flexural strength 88 MPa and Izod impact strength 60 kJ/m².


Anycubic ACE Pro and spool
The chip in the spool lets the Anycubic ACE Pro identify the filament automatically. The reusable threaded spool withstands up to 100 °C.


Reviews
There are no reviews yet.