Description
Multi-colour 3D printer with heated chamber and ACE 2 Pro module
The FDM Anycubic Kobra S1 Max Combo 3D printer has a build volume of 350 × 350 × 350 mm and prints in up to four colours with the included ACE 2 Pro module. The multi-colour system can be expanded to 16 colours.

CoreXY motion and speed
In the all-metal CoreXY design, the X and Y axes run on linear guides and the Z axis is driven by one motor through three trapezoidal screws and three guides. The recommended print speed is 300 mm/s and the maximum 600 mm/s, and dual-fan cooling cools layers even at high speed. Layer height can be set from 0.08 to 0.28 mm; positioning accuracy is 0.0125 mm on X and Y and 0.0008 mm on Z.

LeviQ 3.0 automatic levelling
LeviQ 3.0 prepares the printer for work and gives an even first layer without repeated manual adjustment. Adaptive levelling follows the build plate surface, and flow dynamics calibration regulates filament feed for even deposition.

Heated chamber and technical filaments
The nozzle heats up to 350 °C, the bed up to 120 °C and the actively heated chamber up to 65 °C, so the printer handles fibre-reinforced filaments too. Supported materials are PLA, PETG, TPU, PET, PVA, ABS, ASA, PC, PA, PA6-CF, PC-CF, PC-GF, PET-CF, PLA-CF and PETG-CF. The hardened steel extruder gear suits carbon fibre filaments, a titanium alloy coupler acts as a thermal barrier against clogs, and the hardened steel nozzle resists abrasive materials. The standard nozzle is 0.4 mm, and 0.25, 0.6 and 0.8 mm nozzles also fit.
ACE 2 Pro dries and feeds filament
The ACE 2 Pro dries filament at up to 65 °C even while printing, temperature and humidity sensors monitor the module interior and a solenoid valve removes moisture. Four independent brushless motors and a buffer feed and retract filament, which reduces the risk of jams. The module estimates the remaining filament, changes and refills filament automatically and identifies the filament.
AI print monitoring
AI-based detection spots foreign objects on the bed and spaghetti failures, and object skipping bypasses a damaged part in a batch print. A filament run-out sensor monitors the material, and after a power cut the printer resumes the interrupted job.
Maintenance, noise and air filter
A quick-release hotend and an accessible waste chute make daily maintenance easier, and the printer is controlled from a 4.3-inch capacitive touchscreen. In quiet mode the printer runs at 45 dB and the ACE 2 Pro below 48 dB. An activated carbon filter cleans the air, and a spare pack of activated carbon is included.

Software and connectivity
The printer works with AC Slicer, PrusaSlicer and Cura, and Anycubic Slicer offers ready presets for different materials. STL and OBJ files are accepted as input. With the Anycubic App you can monitor progress remotely in real time and record time-lapse video. Connectivity is 2.4 GHz and 5 GHz Wi-Fi 6 plus an Ethernet port.
In the box
- 3D printer Anycubic Kobra S1 Max Combo, 1 pc
- ACE 2 Pro multi-colour module, 1 pc
- spool holder, 1 pc
- spool holder assembly, 1 pc
- signal cable, 1 pc
- PTFE tubes, 4 pcs
- power cords, 2 pcs
- detection module with four-way hub, 1 pc
- M4 × 16 screws, 2 pcs
- M2.5 × 25 screws, 2 pcs
- cable clips, 2 pcs
- Allen keys 2.5 mm, 2.0 mm and 1.5 mm
- filament samples
- nozzle cleaning needle
- lubricant
- 0.6 mm hardened steel nozzle, 1 pc
- nozzle cleaning module, 1 pc
- nozzle washer, 1 pc
- activated carbon pack, 1 pc



Reviews
There are no reviews yet.