Description
PLA filament with a matte finish for decorative prints
The maker recommends the matte PLA filament PLA Classic for printing decorative items, toys, accessories, figurines and light fittings. The diameter tolerance is ±0.02 mm, and the neatly wound filament tangles less, which lowers the risk of knots and nozzle clogs.

Printing temperature and speed
The bed temperature is 50–60 °C and the maximum print speed 450 mm/s. The maker recommends a textured PEI build plate, which needs no pre-treatment, and the cooling fan switched on. Retraction distance is 0.8–1.2 mm at 30–40 mm/s, and PVA works as the support material.

Matte finish and mechanical properties
The filament density is 1.36 g/cm³. According to the maker’s test data, tensile strength is 27±4 MPa, flexural strength 50±6 MPa and notched Izod impact strength 8±3 kJ/m². The heat deflection temperature (HDT) of a printed part is 55±3 °C.

Storage and drying
Keep the filament in a cool, dry place in its sealed original packaging. To keep the colour, store the spool away from direct sunlight, as UV light can turn PLA yellowish. The drying temperature for the filament is 50 °C.






Reviews
There are no reviews yet.