Description
Filament dryer for one spool that dries while you print
The Sunlu FilaDryer S2 is a filament dryer that works while printing, with 360° circulating heat that warms the spool from every side. The dryer takes 1.75 mm, 2.85 mm and 3.00 mm filament, including PLA, PETG, TPU, ABS, PA and PC.


Temperature and drying time by filament
The maker recommends drying PLA and wood filament at 45–50 °C, PETG, ABS, ASA, TPU, PVA and PMMA at 50–55 °C, and PA and PC at 60–70 °C, all for 3–6 hours. On the touchscreen you set the temperature, drying time, filament type, LED light and °C or °F unit, and pick the filament’s recommended settings with one touch.

Use
Place the assembled roller in the groove at the bottom of the chamber and set the spool on it. For anticlockwise unwinding run the filament through hole 1, for clockwise unwinding through hole 2, so the filament runs straight to the printer. Connect the power adapter, double-tap to switch the dryer on and choose the menu with the SET button.

In the box
- Filament dryer Sunlu FilaDryer S2, 1 pc
- Power adapter, 1 pc
- User guide, 1 pc



Reviews
There are no reviews yet.