Description
PLA filament with a matte surface that hides layer lines
SUNLU PLA Matte is a matte PLA filament whose fine surface texture makes layer lines less visible and gives the model a soft look without a plastic shine.

Precise diameter and low shrinkage
The diameter tolerance is ±0.02 mm, which keeps the filament feed even. Moulding shrinkage is 0.1–0.3%, tensile strength 39 ± 6 MPa and flexural strength 72 ± 6 MPa.

Print settings
At 50–100 mm/s the recommended nozzle temperature is 205–215 °C, at 100–230 mm/s 215–245 °C. The bed temperature is 50–60 °C and the maker recommends a textured PEI build plate that needs no preparation. Retraction is 0.8–1.2 mm at 30–40 mm/s, and PVA filament suits support structures.

Neat winding and vacuum packing
The tightly and evenly wound strand reduces the risk of tangles and nozzle clogs. The filament spool is vacuum-packed, damp filament is dried at 50 °C, and the spool is kept out of direct sunlight to prevent yellowing.







Reviews
There are no reviews yet.