Description
Multi-colour system and filament dryer for the QIDI Max4 printer
The QIDI Box is a multi-colour system and filament dryer for the QIDI Max4, and as the Max4 and Plus 5 share the same connection hardware, it also works directly with the Plus 5. One Box holds four spools 50–72 mm wide and 195–202 mm in diameter.

Four channels and a hardened steel drive
Each of the four channels has its own 42-type stepper motor, hardened steel dual gears and an indicator light. The system also feeds carbon- and glass-fibre composites: PLA-CF/GF, PETG-CF/GF, ABS-CF/GF, PET-CF/GF and PPS-CF, as well as PLA, PETG, ABS, ASA, PET, PA, PC, PP, POM, HIPS and TPU 64D. PVA and BVOH are fed once dried.

Drying filament while printing
While you print, the system dries the filament itself, for PLA, ABS, ASA, PA, PC, PET, PETG, PPS and PLA Wood. In the airtight storage compartment the included desiccant packs absorb moisture. Temperature and humidity are shown in real time on the screen and in QIDI Studio.


Spare spool, fault detection and NFC
When filament runs out, feeding switches to a spare spool automatically, and the system detects tangles, clogs and run-out. NFC recognises QIDI filaments and sets their print parameters. A separate channel can print a breakaway or soluble support material. Two temperature sensors and a PTC fuse cut the power if an abnormal temperature is detected.


In the box
- QIDI Box Max4 multi-colour system, 1 pc
- Power cord
- 8–4-pin signal cable
- BOX Hub and its signal cable
- PTFE tube 1000 mm, 5 pcs
- Desiccant, 4 pcs
- PTFE tube clamp, 2 pcs


Reviews
There are no reviews yet.