Description
Network switch with 2.5G and 10G ports for NAS and workstations
The unmanaged network switch ASUS ProArt PQG-U1080 adds eight 2.5 Gbit/s RJ45 ports and two 10 Gbit/s SFP+ ports to a wired network. An SFP+ port is a slot for a swappable 10 Gbit/s module. The fast ports take NAS units, workstations, PCs and Wi-Fi 7 access points. The 2.5 Gbit/s ports work with existing CAT5e cables.
As soon as the cables are connected, an unmanaged network switch is working
An unmanaged network switch is a plug and play device that adds wired ports next to a router and starts working without any setup. The switch stores the MAC addresses (the fixed hardware addresses of network devices) of connected devices in a table and sends data only to the recipient’s port; the PQG-U1080 table holds 16K addresses. A managed switch adds a web interface for setting up VLANs (separate logical networks) and QoS (traffic priorities), while an unmanaged one gives the same fast ports ready to use.
Performance and standards
The forwarding rate is 59.52 million packets per second with 64-byte packets, the packet buffer is 8 Mbit and jumbo frames are up to 10K bytes. The switch supports IEEE 802.3bz (2.5GBASE-T), IEEE 802.3ab, IEEE 802.3u and 10GBASE-KR, plus IEEE 802.3x flow control. LEDs show power and port status.
Placement and power
The switch can be placed on a desk, on a pole or on a metal surface with its magnet, and weighs 260 g. Power comes from an external adapter with 12 V, 1 A output. Operating temperature is 0–40 °C at 10–90% relative humidity, non-condensing.
In the box
- ASUS ProArt PQG-U1080 network switch
- Power adapter 12 V, 1 A
- Quick start guide
- Cable tie


Reviews
There are no reviews yet.