Description
Monitor wall mount with a gas spring arm for one screen
The monitor wall mount ONKRON G150-B for one 13-34″ screen carries a monitor weighing 1–8 kg. The monitor attaches to the arm with a VESA pattern of 75 × 75 or 100 × 100 mm.
Monitor arm movements
The screen tilts from +90° to -45° and swivels 180° at the end of the arm. The two joints of the gas spring arm bring the screen closer or further away, with depth from 90 to 508 mm.
Installation
On a timber-frame wall the wall plate is fixed to a timber stud located with a stud finder, and the fixing points are marked with a level and a pencil. The wall plate is held by three screws, supplied with wall plugs and washers. You need a drill with 4.5 mm and 10 mm bits, a hammer and a Phillips screwdriver.
In the box
- Gas spring arm with wall plate and VESA plate
- 3 wall screws, 3 wall plugs and 3 washers
- Monitor screws: 4 × M4×12, 4 × M4×16, 4 × M6×12 and 4 × M6×16
- 4 D6 washers and 4 spacers
- S6 hex key
- Extra parts: 3 × part B and 4 × part C



Reviews
There are no reviews yet.