Description
Robotic lawn mower with all-wheel drive and RTK positioning
The all-wheel-drive robotic lawn mower RockMow Z130 mows in parallel lanes and returns to its charging station by itself when the battery runs low, then resumes mowing after charging. The floating cutting deck follows changes in ground level, and electric adjustment sets the cutting height between 20 and 70 mm. In the app you can set a mowing schedule and a night pause that leaves hedgehogs and other nocturnal animals undisturbed.
Navigation, cameras and rain sensor
RTK (real-time kinematic positioning) corrects the satellite signal with the RTK reference station, so the mower knows its position to the centimetre. A front binocular camera and two side cameras detect obstacles, which the mower drives around, and it passes through gaps as narrow as 0.8 m. When it rains, the rain sensor sends the mower back to the charging station, and mowing resumes after a rain delay that defaults to 180 minutes and can be changed in the app. For theft protection the mower has an alarm, a PIN code and location tracking over 4G in the app.
Installation and mapping
The charging station goes on level ground in an open area, within 10 m of the power supply, with 2 m of clear space around it. The RTK reference station is set up under open sky at least 2 m from walls and fences and connected to the charging station with the RTK extension cable. Then pair the mower with the Roborock app over Bluetooth and 2.4 GHz Wi-Fi and start mapping: the mower drives along the boundaries of the work area and saves the map.
Cleaning and maintenance
The manufacturer recommends checking and servicing the mower once a week. Clean the body, wheels and underside with a brush or a garden hose, and the camera lenses with a soft dry cloth. Replace the blades every 1 to 2 months, always with new screws. For winter, charge the battery to 50–70%, switch the mower off and keep the charging tower in a dry indoor room.
In the box
- Roborock RockMow Z130 robotic lawn mower
- Charging station and 6 charging station screws
- RTK reference station with GNSS antenna, mounting rods and triangular stake
- RTK extension cable
- Power supply and power supply extension cable
- Spare blade set: 6 blades and 6 screws
- Hex key
- 4 cable clips and 10 extension cable pegs











Reviews
There are no reviews yet.